How to reset or factory restore Sendo S1 device?
Resetting or factory restoring a Sendo S1 device can be helpful if it's experiencing software issues, malfunctioning or if you'd like to start fresh and remove all personal data from the device. Here are the most common and recommended ways to reset or factory restore a Sendo S1 device:
1. Using the built-in recovery menu
- Turn off the device.
- Press and hold the power button to enter recovery mode.
- Use the volume buttons to navigate and select "Wipe data/factory reset".
- Press the power button to confirm the operation.
- Wait for the device to reset and reboot.
2. Using a computer
- Connect the device to your computer using a USB cable.
- Open the Sendo S1's device manager on your computer.
- Go to "Tools" and select "Flash Download" or "Flash ROM".
- Select the firmware file for your device.
- Choose to wipe data/factory reset and select "Start Download".
- Once the download is complete, disconnect the device from the computer.
- Turn off the device and enter recovery mode.
- Use the volume buttons to navigate and select "Wipe data/factory reset".
- Press the power button to confirm the operation.
- Wait for the device to reset and reboot.
3. Using a panicked mode
- Enter an Emergency PIN code (default is 000).
- Tap "Factory data, pin"
- Enter the Emergency PIN
- Tap "Yes --- Android OS"
- Wait for the device to reset and reboot
It's important to note that a factory restore will erase all data from the device, including personal data, and restore it to its original state. Use this process with caution and make sure to backup any important data before rebooting the device to avoid data loss.
