How to reset or factory restore Samsung Rex 80 S5222R device?
A Samsung Rex 80 S5222R device can be reset or factory restored using either the device's battery, a computer, or a SD card tool. Below are the recommended ways to reset or factory restore your Samsung Rex 80 S5222R device:
Method 1: Battery Reset
1. Turn off your Samsung Rex 80 S5222R device.
2. Unplug the device from the charger and remove the battery.
3. Press the power button and volume up button simultaneously for about 10 seconds until the Samsung logo appears on the screen.
4. Release both buttons and wait for the device to start booting in recovery mode.
5. In recovery mode, select "Wipe data/factory data" using the volume buttons and the power button to confirm the selection.
6. Select "Yes, delete all information on the phone" to proceed with the factory reset.
7. Wait for the device to restart, and it will be reset to its factory settings.
Method 2: Computer Restore
1. Connect your Samsung Rex 80 S5222R device to your computer using a USB cable.
2. Install the Samsung Kies software on your computer and make sure it detects your device.
3. Click on "Backup and Restore" and select "Backup".
4. Save the backup to your computer.
5. Disconnect your device from the computer.
6. Turn off your Samsung Rex 80 S5222R device.
7. Press the power button and volume up button simultaneously for about 10 seconds until the Samsung logo appears on the screen.
8. Release both buttons and wait for the device to start booting in recovery mode.
9. In recovery mode, select "Backup and Restore" using the volume buttons.
10. Select "Restore from Kies" and select the backup you saved on your computer.
11. Wait for the device to restart, and it will be restored to its factory settings.
Method 3: SD Card Tool Restore
1. Download the Samsung Rex 80 S5222R firmware and driver from the Samsung website or from a reliable source.
2. Install the driver on your computer and connect your device to the computer using a USB cable.
3. Open the SD card tool and select "Firmware update".
4. Browse to the firmware file and select it.
5. Click on "Start update" and wait for the device to update.
6. Once the update is complete, your device will be restored to its factory settings.
Note: Restoring your Samsung Rex 80 S5222R device to its factory settings will erase all user data and settings, so it's essential to backup your important files before proceeding with any of these methods.
