How to reset or factory restore Samsung Metro E2202 device?
If you have a Samsung Metro E2202 device and want to restore it to its initial state, you can choose from the following methods to reset or factory restore it:
Method 1: Reset via Settings Menu
1. Power off the device.
2. Press and hold the volume up button and the power button simultaneously.
3. Release when you see the Samsung logo on the screen.
4. Tap the "Volume Down" button repeatedly until "Wipe data/factory data reset" appears on the screen.
5. Use the volume buttons to select "Yes – Delete all user data" and press the power button to confirm.
6. The device will now start the reset process. It may take several minutes to complete.
Method 2: Reset via Recovery Mode
1. Connect the device to a computer using a USB cable.
2. Open the "Samsung Smart Switch" software on the computer.
3. Select "Restore" from the main menu.
4. Select "Metro E2202" from the list of devices.
5. The software will download and install the latest firmware (_116).
6. Once the firmware is installed, select "Wipe data/factory data reset" and press the "Enter" button.
7. The device will be reset to its factory settings.
Method 3: Reset via Recovery Mode and External SD Card
1. Connect the device to a computer using a USB cable.
2. Open a software tool like Odin or DriversToolbox.
3. Download the latest firmware (_116) for Metro E2202 from Samsung's website.
4. Extract the firmware to a folder on your computer.
5. Put the firmware folder in your device's external SD card.
6. Reboot your device by holding down the home button and the power button simultaneously.
7. Use the volume buttons to select "Recovery Mode" and press the power button to confirm.
8. In recovery mode, use the volume buttons to select "Wipe data/factory data reset" and press the power button to confirm.
9. The device will be reset to its factory settings.
Note: Before resetting your device, make sure to backup all important data to an external storage device or cloud storage.
