How to reset or factory restore Sagem VS3 device?
Resetting, recovering, and factory resetting are three terms often used interchangeably. In this context, we are referring to recovering your device from a problematic state, without losing your data.
There are two methods to reset a Sagem VS3 device - using the Hard Reset procedure and using Recovery Software.
Hard Reset:
1. Turn off the device by removing the battery.
2. Press and hold the Power key for 20 seconds
3. Release the Power key and insert the battery.
4. Press the Power key again until the device turns on.
5. The device will be in recovery mode. Now, navigate to 'Wipe data/factory reset' and tap it.
6. Tap 'Yes - Delete all user data' to confirm. The device will then start the reset process and after it's complete, you'll be prompted to set up your device as new.
Recovery Software:
This method involves using a computer to download and install the Recovery Software onto your device. Here's how:
1. Download the Sagem VS3 Recovery Software from a trusted source.
2. Connect your device to your computer using a cable.
3. Open the Recovery Software on your computer.
4. Select 'Selected Device' on the Recovery Software and click 'Download'.
5. Once the download is complete, click 'Recover'.
6. The device will then enter recovery mode. In the recovery menu, select 'Wipe data/factory reset' and choose 'Yes - Delete all user data'. Wait for the reset process to complete.
7. Once the reset is complete, you can choose to either back up your data or install the latest available firmware.
It's important to note that recovering from a recovery software is less risky than going for a tougher hard reset as it allows you to back up your data before starting the recovery process, and also provides an option to restore the device to its last known working state.
Please be cautious with these procedures as they will erase all data on your device. Make sure you have a backup of your data before attempting any of the methods. If the device is still under warranty, it's best to get it repaired by the manufacturer.
