How to reset or factory restore Sagem MC 959 device?
The Sagem MAC 959 device is an Internet router that can be reset or factory restored to its default settings. Here are the most common and recommended ways to reset or factory restore a Sagem MAC 959:
Method 1: Resetting the device to its default settings through the router's web interface
1. Connect the router to a modem with an Ethernet cable.
2. Connect the router's WAN (Wide Area Network) port to the modem's WAN port.
3. Connect the router's LAN (Local Area Network) port to a device or computer on the same network as the router.
4. Turn on the router.
5. On a separate device or computer, open your web browser and enter the router's IP address in the address bar (usually located in the router manual or on the device's technician documentation).
6. Click on the Reset or Restore option.
7. Enter the reset password, which is usually "admin".
8. Follow the prompts to reset the device to its default settings.
9. The device will reboot and the settings will be reset to their factory defaults.
Method 2: Resetting the device to its default settings with the power button
1. Turn off the device by unplugging it from the modem or router.
2. Hold down the power button on the device for approximately 10 seconds.
3. Release the power button.
4. Plug the device back into the modem or router and wait for it to boot up.
5. The device will reboot and the settings will be reset to their factory defaults.
It is important to note that both methods will erase all custom settings and configurations on the device. Therefore, it is recommended to keep a record of important settings and configurations before resetting the device to its default settings.
