QMobile Noir i10

Home/ QMobile/ Phones/ Noir i10

Table of Contents

Summary

QMobile Noir i10 Price

At the time of it's release in 2014, August, the manufacturer's retail price for a new QMobile Noir i10 was about 120 EUR.

The retail price of a new or used/second hand QMobile Noir i10 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of QMobile Noir i10 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of QMobile Noir i10?

QMobile Noir i10 has a battery capacity of 2000 mAh

How to reset or factory restore QMobile Noir i10 device?

Sure, here are the most common and recommended ways to reset or factory restore a QMobile Noir i10 device: Method 1: UsingSoftware (Stock ROM) Recovery: 1. Go to the QMobile support section on their official website and download the latest stock ROM file for your device. 2. After downloading the file, connect your device to your computer using a USB cable. 3. Install the QMobile USB drivers on your computer. 4. Open a command prompt on your computer and navigate to the folder where the stock ROM file is saved. 5. Run the command "fastboot devices" to check if your device is detected by your computer. 6. Run the command "fastboot flash recovery recovery.img" (replace "recovery.img" with the name of the stock ROM file) to flash the stock ROM onto your device. 7. Wait for the flashing process to complete. 8. Reboot your device and enter recovery mode by pressing and holding the power button and the volume keys simultaneously. 9. Select "wipe data/factory data" and confirm your decision to wipe all data on your device. 10. Reboot your device and enter recovery mode again. 11. Select "apply update from ADB" and select the "priority" option to apply the new firmware. 12. Connect your device to your computer using the USB cable. 13. Open a command prompt on your computer and navigate to the folder where the ADB executable file was saved. 14. Run the command "adb devices" to check if your device is detected by your computer. 15. Run the command "adb push recovery.img / sdcard/" (replace "recovery.img" with the name of the stock ROM file). 16. On your device, go to recovery mode and select "apply update from ADB". 17. Select "priority" and choose "adb program" as the source. 18. Check the box for "does not confirm" and select "skipped all." 19. Reboot your device and connect it to your computer using the USB cable. 20. Open a command prompt on your computer and navigate to the folder where the ADB executable file was saved. 21. Run the command "fastboot devices" to check if your device is detected by your computer. 22. Reboot your