How to reset or factory restore Philips X528 device?
The Philips X528 is a popular soundbar that is designed to provide high-quality audio sound. However, there may be situations where you need to reset or factory restore the device to its default settings. In such cases, you can follow either of the two recommended methods to factory reset your Philips X528 soundbar:
Method 1: Using the Philips X528's built-in reset feature
Philips X528 soundbars come with a built-in reset feature that can be used to factory reset the device to its default settings. To reset the Philips X528 soundbar using this method, follow these steps:
Step 1: Turn off the soundbar
Unplug the power cable from the Philips X528 soundbar and wait for at least 30 seconds before plugging it back into the power outlet.
Step 2: Press and hold the “Source” button
Press and hold the “Source” button on the Philips X528 soundbar until the soundbar's LED light starts flashing rapidly.
Step 3: Press and hold the “RED” button
While still holding the “Source” button, press and hold the “RED” button on the Philips X528 soundbar until the soundbar's LED light starts flashing rapidly again.
Step 4: Wait for the soundbar to reset
Wait for the soundbar's LED light to stop flashing and then turn on the soundbar. The soundbar will start to factory reset and will take approximately 3-5 minutes to complete.
Method 2: Using a factory reset disc
Another method to factory reset the Philips X528 soundbar is to use a factory reset disc. This method requires a factory reset disc that can be obtained from the Philips website or a Philips service center.
Step 1: Unplug the power cable
Unplug the power cable from the Philips X528 soundbar and wait for at least 30 seconds before plugging it back into the power outlet.
Step 2: Install the factory reset disc
Insert the factory reset disc into the Philips X528 soundbar's USB ports.
Step 3: Press and hold the source button
Press and hold the "source" button on the Philips X528 soundbar until the soundbar's LED light starts flashing rapidly.
Step 4: Press and hold the red button
While still holding the "source" button, press and hold the "red" button on the Philips X528 soundbar until the soundbar's LED light starts flashing rapidly again.
Step 5: Wait for the soundbar to reset
Wait for the soundbar's LED light to stop flashing and then turn on the soundbar. The soundbar will start to factory reset and will take approximately 3-5 minutes to complete.
Conclusion
In conclusion, both the built-in reset feature and factory reset disc can be used to reset or factory reset the Philips X528 soundbar. Before choosing the method to reset your soundbar, make sure to check if you have access to the factory reset disc. If yes, then the factory reset disc is the recommended method as it will completely wipe out all data on the soundbar to its default settings.
