How to reset or factory restore Philips W632 device?
ThePhilips W632 is a smartwatch that can be reset or factory restored to its original settings if needed. Here are the most common and recommended ways to do so:
1. Using the Philips W632 app:
a. Open the Philips W632 app on your smartphone.
b. Tap on the "Settings" icon on the home screen.
c. Scroll down and tap on "Factory Reset".
d. Confirm the reset by tapping "OK".
e. Wait for the device to reset and turn off automatically.
2. Using a Philips W632 USB cable and computer:
a. Connect the Philips W632 smartwatch to your computer using the USB cable.
b. Open Control Panel on your computer and go to "Device Manager".
c. Find and expand "Philips Smartwatch CurrentLink 632".
d. Right-click on the device and select "Properties".
e. Click on "Revision" and select "Driver".
f. Uninstall the driver by clicking "OK".
g. Wait for the device to be detected by your computer and install the latest driver.
h. Once the driver is installed, open the Philips W632 app on your smartphone.
i. Tap on the "Settings" icon on the home screen.
j. Scroll down and tap on "Factory Reset".
k. Confirm the reset by tapping "OK".
l. Wait for the device to reset and turn off automatically.
3. Using a Philips W632 button:
a. Press and hold the button located on the side of thePhilips W632 until it starts flashing.
b. Wait for 5-7 seconds until the device enters "Factory Reset" mode.
c. Press and hold the button again until the "Factory Reset" mode disappears.
d. Press and hold the button again until the device turns off.
e. Press and hold the button again until the device turns back on.
f. Repeat steps 5-e until the device enters "OEM Mode".
g. Tap and hold the screen to select andELLIPSE button.
h. Tap "Accept and confirm".
i. Wait for the device to reset and turn off automatically.
Note: It is important to note that when you reset your Philips W632 smartwatch, all data stored on the device, such as contacts and notification settings, will be erased.
