Micromax X396

Home/ Micromax/ Phones/ X396

Table of Contents

Summary

Micromax X396 Price

The retail price of a new or used/second hand Micromax X396 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Micromax X396 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Micromax X396?

The battery capacity of Micromax X396 is 1200 mAh

What is the display size of Micromax X396?

The display size of Micromax X396 is 3.5 inches

What is the processor of Micromax X396?

The processor of Micromax X396 is 1 GHz single core

How to reset or factory restore Micromax X396 device?

If you face any issues with your Micromax X396 device and want to reset it, there are a few common and recommended ways to do so. Here they are: Method 1: Resetting via Softwares Step 1: Download and install the latest USB driver for your Micromax X396 on your PC. Step 2: Enable USB debugging mode on your device by going to Settings Step 3: Connect your device to the computer using a USB cable. Step 4: Run the pre-installed USB driver application. Step 5: In the application, locate the "meta.xml' file and select it. Step 6: Click the "reload" button. Step 7: Select "CoolMenu 5" from the list and click "enter fatal flash". Step 8: In the next screen, enter the correct recovery key when prompted and confirm it. Note: The exact steps may vary slightly depending on the version of the firmware you have installed on your device. Method 2: Resetting via Hardware Step 1: Remove the battery. Step 2: Hold down the Power button and Volume Up button at the same time until a triangle menu appears. Step 3: Select Bootloader mode. Step 4: Wait for the device to boot up. Step 5: On the bootloader screen, use the Volume buttons to navigate and select "Highlight Unlock Bootloader" and confirm it. Step 6: Wait for the device to restart and reconnect it to your computer using a USB cable. Step 7: Run the pre-installed USB driver application. Step 8: In the application, locate the "meta.xml' file and select it. Step 9: Click the "reload" button. Step 10: Select "Recovery" from the list and click "enter". Step 11: Confirm the bootloader unlock by selecting "Yes" and wait for the device to restart. Note: Factory reset will erase all data on your device, so make sure to back up your important data before performing the reset process.