How to reset or factory restore Intex Aqua Xtreme device?
To reset or factory restore an Intex Aqua Xtreme device, follow these steps:
Method 1: Using recovery mode
1. Turn off the device completely and then press and hold the "Volume Up" button and the "Power Button" at the same time for around 10 seconds.
2. The recovery screen will appear; press the "Volume Down" button to highlight "Yes - wip data/factory reset" and then press the "Volume Up" button to select it.
3. Once the "Yes - delete all user data" message appears, press the "Volume Down" button to highlight "Yes" and then press the "Volume Up" button to select it.
4. The device will begin to reset the settings and data. This may take several minutes.
5. Once the reset is complete, the device will restart and ask you to set it up again as if it were new.
Method 2: Using webroot access
1. Connect the device to a computer using a USB cable.
2. Download and install the PC GUI software provided by Intex on your computer.
3. Open the PC GUI software and select the device from the list of connected devices.
4. Click on the "Home" tab and then click on "Factory Reset".
5. A confirmation message will appear; click "Yes" to proceed with the reset.
6. The device will begin to reset the settings and data. This may take several minutes.
7. Once the reset is complete, the device will restart and ask you to set it up again as if it were new.
Method 3: Using a custom recovery
1. Download and install a custom recovery software for your device from a trusted source.
2. Once the custom recovery is installed, reboot the device into recovery mode.
3. Once in recovery mode, press the "Volume Up" button and then use the volume keys to highlight "Wipe Data/Factory Reset".
4. Press the "Power Button" to select "Wipe Data/Factory Reset".
5. The device will begin to reset the settings and data. This may take several minutes.
6. Once the reset is complete, the device will restart and ask you to set it up again as if it were new.
It's important to note that resetting the device will completely erase all data, including any important passwords or files, so it should only be done as a last resort. It is recommended to backup any important data before resetting the device.
