How to reset or factory restore Intex Aqua Xtreme II device?
To reset or factory restore an Intex Aqua Xtreme II device, you can follow these steps:
Method 1: Using the Default Settings
1. Turn off the device and wait for at least 5-10 seconds.
2. Press and hold the power button and the volume up button simultaneously until the screen turns blue.
3. Release both buttons and wait for the device to reboot.
4. Once the device reboots, press and hold the power button and the volume down button simultaneously.
5. Release both buttons when the device turns off again.
6. Press and hold the power button and the volume down button simultaneously until the screen turns blue.
7. Release both buttons when the device turns off again.
8. Press and hold the power button only.
9. Release the power button and wait for the device to reboot.
10. Once the device reboots, follow the on-screen instructions to set up the device.
Method 2: Using a Computer
1. Connect the device to your computer using the USB cable.
2. Go to the manufacturer’s website and download the latest drivers and software for your device.
3. Install the drivers and software on your computer.
4. Connect the device to your computer and make sure it is detected by the software.
5. Go to the device’s settings page and look for the option to reset or factory reset.
6. Follow the on-screen instructions to reset the device.
7. Once the reset is complete, disconnect the device from your computer and turn it on.
8. Follow the on-screen instructions to set up the device.
Method 3: Using a Recovery Mode
1. Turn off the device and wait for at least 5-10 seconds.
2. Press and hold the power button and the volume up button simultaneously until the screen turns on.
3. Release both buttons and wait for the device to reboot.
4. Once the device reboots, press and hold the power button and the volume down button simultaneously.
5. Release both buttons when the device turns off again.
6. Press and hold the power button and the volume down button simultaneously until the device turns off again.
7. Press and hold the power button only.
8. Release the power button and wait for the device to turn on.
9. Once the device turns on, wait for the recovery mode logo to appear.
10. Use the volume buttons to navigate and the power button to select.
11. Select “Wipe Data/Factory reset” and confirm withYes”.
12. Wait for the device to reset and turn off.
13. Disconnect the device from your computer and turn it on.
14. Follow the on-screen instructions to set up the device.
Note: Resetting your device to factory settings will erase all data, including user data, settings, and files. Make sure you have backed up any important data before attempting to reset the device.
