Intex Aqua GenX

Home/ Intex/ Phones/ Aqua GenX
Intex Aqua GenX image - Nikonet125.com
An image of the Intex Aqua GenX.
Table of Contents


The Intex Aqua GenX is a budget smartphone with a 5-inch HD display, a MediaTek MT6735P chipset, 2GB of RAM, 16GB of storage, an 8MP rear camera, and a 5MP selfie camera. It runs Android 5.1 Lollipop and is powered by a 2500mAh battery.

Intex Aqua GenX Price

The retail price of a new or used/second hand Intex Aqua GenX varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Intex Aqua GenX across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the screen size of the Intex Aqua GenX?

The Intex Aqua GenX has a 5.5 inch screen.

What type of processor does the Intex Aqua GenX have?

The Intex Aqua GenX has a 1.4 GHz octa-core processor.

What type of camera does the Intex Aqua GenX have?

The Intex Aqua GenX has a 13 MP rear camera and a 5 MP front camera.

How to reset or factory restore Intex Aqua GenX device?

If you need to reset or factory restore an Intex Aqua GenX device, there are several common and recommended ways to do so. Before performing any of these methods, make sure you have backed up any important data you wish to save, as the reset process will erase all data on the device. 1. Backup and Reset Method: * Connect the device to a computer using a USB cable. * Install the Intex Aqua GenX PC suite software on the computer. * Connect the device to the PC suite using the USB cable. * Click on the "Uninstall" or "Reset" option in the PC suite software to erase all data from the device. * Disconnect the device from the computer and USB cable, and turn it on. * Wait for the device to start up. Once it has, the device will be reset to its factory settings, and you will be prompted to set up the device from scratch. 1. Bootloader Recovery Method: * Boot the device into recovery mode by holding the power key down until the Intex logo appears on the screen. * Use the volume buttons to navigate through the recovery options and select "Reset to factory settings". * Wait for the device to reset, which may take a few minutes. * Once the reset is complete, select "Reset ARC" and wait for the device to go through this process. This is to ensure that the device is properly restored. * Once the device has been restored, select "Reboot system now" or "Yes -- Yes" depending on the device. * Press the power key to turn the device off and on again. The device should now be factory reset and ready for use. These are the most common and recommended ways to reset or factory restore an Intex Aqua GenX device. It is important to note that the process may vary slightly depending on The UI of your Device and also it may take some time. If the device does not work properly after a reset, contact Intex customer support for assistance.


Specifications

Network

TechnologyGSM / HSPA / LTE
2G bandsGSM 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bandsHSDPA 900 / 2100
4G bands3, 40
SpeedHSPA, LTE

Launch

Announced2015, August. Released 2015, August
StatusDiscontinued

Body

Dimensions152.6 x 76.4 x 8.4 mm (6.01 x 3.01 x 0.33 in)
Weight175 g (6.17 oz)
SIMDual SIM

Display

TypeIPS LCD
Size5.5 inches, 83.4 cm2 (~71.5% screen-to-body ratio)
Resolution1080 x 1920 pixels, 16:9 ratio (~401 ppi density)
ProtectionAsahi Dragontrail Glass

Platform

OSAndroid 5.1 (Lollipop)
ChipsetMediatek MT6753 (28 nm)
CPUOcta-core 1.3 GHz Cortex-A53
GPUMali-T720MP3

Memory

Card slotmicroSDHC (dedicated slot)
Internal16GB 2GB RAM

Main Camera

Single13 MP, AF
FeaturesLED flash, panorama, HDR
Video1080p@30fps

Selfie camera

Single5 MP
Video

Sound

LoudspeakerYes
3.5mm jackYes

Comms

WLANWi-Fi 802.11 b/g/n
Bluetooth4.0, A2DP
PositioningGPS
NFCNo
RadioFM radio
USBmicroUSB 2.0

Features

SensorsAccelerometer, proximity

Battery

TypeLi-Ion 2850 mAh, non-removable

Misc

ColorsWhite
SAR EU0.72 W/kg (head)

Other Intex phones like the Aqua GenX