HP iPAQ hw6510

Home/ HP/ Phones/ iPAQ hw6510

Table of Contents

Summary

HP iPAQ hw6510 Price

The retail price of a new or used/second hand HP iPAQ hw6510 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of HP iPAQ hw6510 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore HP iPAQ hw6510 device?

To reset or factory restore a HP iPAQ hw6510 device, there are several methods that you can use. Here are the most common and recommended ways: Method 1: Using the Microsoft ActiveSync tool 1. Connect your iPAQ hw6510 device to your computer using a USB cable. 2. Open ActiveSync on your computer and select your device from the list of connected devices. 3. Click on the device name to go to its properties page. 4. Click on the "Reset" button, then select "Factory Data". 5. Click "Yes" to confirm the reset. 6. Wait for the device to reset, which can take several minutes. Method 2: Using the built-in HP Factory Reset tool 1. Turn off your iPAQ hw6510 device. 2. Press and hold the Volume Down button and the Power button for 10 seconds until the HP logo appears. 3. Tap the Volume Down button to select "Recovery Mode". 4. Tap the Waiting button until the HP logo is displayed again. 5. Tap the Volume Down button, then select "Wipe Data/Factory Reset". 6. Tap "Yes" to confirm the reset. 7. Wait for the device to reset and reboot. Method 3: Using the Recovery Console 1. Connect your iPAQ hw6510 device to your computer using a USB cable. 2. Open Recovery Console on your computer by typing "Recovery Console" + Enter in the Run dialog box. 3. Click on "Devices" and select your device from the list of connected devices. 4. Click on the device name, then select "Volume Manager". 5. Select the volume on which the Windows operating system is installed, then click the "Delete" button. 6. Click "Yes" to confirm the deletion. 7. After the volume is deleted, reboot the device into Recovery Console. 8. Click on "Tools", then select "Deployment Manager". 9. Select the image that you want to use for the factory reset, then click "Deploy Image". 10. Wait for the device to reset and reboot. These are the most common and recommended ways to reset or factory restore a HP iPAQ hw6510 device. Before performing any of these methods, make sure to back up any important data that you still want to keep on the device.

What type of display does the HP iPAQ hw6510 have?

The HP iPAQ hw6510 has a 2.8-inch QVGA TFT-LCD display.

What type of processor does the HP iPAQ hw6510 have?

The HP iPAQ hw6510 has a 416MHz Intel PXA270 processor.

What type of memory does the HP iPAQ hw6510 have?

The HP iPAQ hw6510 has 64MB of RAM and 128MB of ROM.

Specifications

Network

Technology: GSM
2G bands: GSM 850 / 900 / 1800 / 1900
GPRS: Class 10
EDGE: Class 10

Launch

Announced: 2005, Q2
Status: Discontinued

Body

Dimensions: 118 x 71 x 18 mm (4.65 x 2.80 x 0.71 in)
Weight: 165 g (5.82 oz)
Keyboard: QWERTY
SIM: Mini-SIM

Display

Type: TFT resistive touchscreen, 65K colors
Size: 3.0 inches, 45 x 60 mm, 29.0 cm2 (~34.7% screen-to-body ratio)
Resolution: 240 x 240 pixels, 1:1 ratio (~113 ppi density)