How to reset or factory restore HP iPAQ h6320 device?
Sure! The HP iPAQ h6320 is a mobile device that runs on the Windows XP Tablet PC Edition operating system. There are two ways to reset or factory restore this device: using the buttons on the device itself, or using a computer and a special tool.
PERFORMING A HARD RESET USING THE DEVICE BUTTONS:
1. Press and hold the power button on the device for 15 seconds. This will power off the device.
2. While the device is still powered off, press and hold the Volume Down button on the device for 10 seconds.
3. Release the Volume Down button and press and hold the Power button on the device for 10 seconds.
4. Release the Power button and wait for the device to turn on.
5. Once the device has turned on, it will boot into a special menu called the Bootloader or CPMU. In this menu, you should see an option to reset to factory settings.
6. Select the option to reset to factory settings and wait for the device to erase all data and settings.
PERFORMING A HARD RESET USING A COMPUTER:
1. Connect the HP iPAQ h6320 device to your computer via the USB cable.
2. Open the Device Manager on your computer.
3. Click on the HP iPAQ h6320 device to open its properties.
4. Go to the Power Management tab and make sure that the box next to "Allow battery to discharge the device completely" is checked.
5. Go to the Security tab and check the box next to "Disable password protection".
6. Go to the Configuration tab and check the box next to "Enable this device to be used by Windows ME/NT/2000".
7. Click the "Reset" button. This will erase all data and settings on the device.
8. Once the device has been reset, disconnect it from your computer and turn it on. The device should boot into the same special menu that it does when you perform a hard reset using the device buttons.
It's important to note that performing a factory reset will erase all data and settings on the device, so make sure to make a backup of any important files or data before performing a hard reset. Additionally, if you have password protection configured on your device, you will need to remove it before you can perform a hard reset.
