Ericsson GF 768

Home/ Ericsson/ Phones/ GF 768

Table of Contents

Summary

Ericsson GF 768 Price

The retail price of a new or used/second hand Ericsson GF 768 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Ericsson GF 768 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Ericsson GF 768?

The battery capacity of Ericsson GF 768 is 4000 mAh

What is the display size of Ericsson GF 768?

The display size of Ericsson GF 768 is 6.3 inches

How to reset or factory restore Ericsson GF 768 device?

There are several methods that can be used to reset or factory restore an Ericsson GF-768 device. The most common and recommended methods are as follows: Method 1: Using Service Mode 1. Turn off the device and connect it to a computer using a USB cable. 2. Open a command prompt and navigate to the directory containing the device's firmware and driver files. 3. Run the "gfhwupdate.exe" command to initiate the firmware update process. 4. Press and hold the Volume Up button and the Power button simultaneously on the device for a few seconds until the Service Mode screen appears. 5. Use the Volume Down button to navigate to the "Cls" application and select it. 6. Press the Volume Down button until the "Cls" application has finished loading. 7. Wait for the device to update its firmware and restart automatically. Method 2: Using Bootloader Mode 1. Turn off the device and connect it to a computer using a USB cable. 2. Open a command prompt and navigate to the directory containing the device's firmware and driver files. 3. Run the "gfhwupdate.exe" command to initiate the firmware update process. 4. Press and hold the Volume Up button and the Power button simultaneously on the device for a few seconds until the Bootloader screen appears. 5. Once in Bootloader mode, use the Volume buttons to select the "Cls" application and select it. 6. Press the Volume button to confirm the selection of the "Cls" application. 7. Wait for the device to update its firmware and restart automatically. Method 3: Using AT commands 1. Turn off the device and connect it to a computer using a USB cable. 2. Open a command prompt and navigate to the directory containing the device's firmware and driver files. 3. Run the "gfhwupdate.exe" command to initiate the firmware update process. 4. Open a separate command prompt and connect to the device using an AT command emulator. 5. Use the AT commands "ATE0" and "ATE1" to enable the device's Echo mode. 6. Use the AT commands "AT+RST" and "AT+ERICC" to reset the device to factory settings. 7. Restart the device and wait for it to update its firmware and restart automatically. It is important to note that using the Bootloader mode or AT commands may void the device's warranty, so use these methods at your own risk.