How to reset or factory restore Celkon C720 device?
A Celkon C720 reset or factory restore can be done in various ways, depending on the situation you are in. Below are the most common and recommended methods:
1. Resetting through hardware buttons:
The most common and recommended way to factory reset a Celkon C720 device is through hardware buttons. This method is also known as a hard reset or a physical reset. Follow these steps:
a. Turn off the device by pressing and holding the power button until the screen goes black.
b. Press and hold the volume down button and the power button at the same time.
c. Release both buttons when the Celkon logo appears on the screen.
d. When the Celkon payment screen appears, press and hold the volume down button again.
e. Release both buttons when the Celkon logo reappears.
f. On the Celkon payment screen, press the volume down button until the last option "Factory Data Reset (FDR)" appears.
g. Press and hold the power button to select the "Factory Data Reset (FDR)" option.
h. Wait for the device to reset and factory data erased. The device will take several minutes to complete the process.
1. Resetting through recovery mode:
Another way to factory reset a Celkon C720 device is through recovery mode. This method requires a computer with a USB cable and the appropriate Celkon firmware. Follow these steps:
a. Connect the device to the computer via USB cable.
b. Open a command prompt on the computer and navigate to the "C:\Program Files\Celkon\Mobile Technology Solutions\MSP Drivers" directory.
c. Type "adb devices" to ensure the computer recognizes the device.
d. Reboot your device into recovery mode by typing "adb reboot recovery" in the command prompt.
e. In recovery mode, go to "Factory Data Reset."
f. Select "Yes - delete all user data" and wait for the device to reset and factory data erased.
1. Resetting through bootloader:
A bootloader reset can be done in case you still cannot reset your Celkon C720 through the other methods. This method requires a computer with a USB cable and the appropriate Celkon firmware. Follow these steps:
a. Connect the device to the computer via USB cable.
b. Open a command prompt on the computer and navigate to the "C:\Program Files\Celkon\Mobile Technology Solutions\MSP Drivers" directory.
c. Type "adb devices" to ensure the computer recognizes the device.
d. Boot the device into bootloader by typing "adb reboot bootloader" in the command prompt.
e. In bootloader, select "Yes - All user data will be erased" and fastboot
