How to reset or factory restore Celkon A40 device?
Celkon A40 smartphone users may encounter various technical issues that may require them to reset or factory restore their device. Fortunately, Celkon A40 devices have a simple process of resetting or factory restoring the device. Below are the most common and recommended ways to reset or factory restore a Celkon A40 device:
1. Resetting using the power button and volume rocker
a. Turn off the device.
b. Press and hold the power button and volume rocker simultaneously for 10-15 seconds until the device restarts.
c. Release the buttons, and the device will enter recovery mode.
d. In recovery mode, highlight the "wipe data/factory reset" option and press the power button to select it.
e. Confirm the factory reset and press the power button again.
f. Wait for the device to restart, and it will now have a factory image.
2. Resetting via recovery mode
a. Turn off the device and connect it to a USB charger.
b. Enable USB debugging on the computer or use a USB debugger tool.
c. Open the command prompt and navigate to the device folder.
d. Type "adb reboot recovery" and press enter.
e. In recovery mode, select "wipe data/factory reset" and confirm it.
f. Reboot the device and wait for it to restart.
3. Software update resetting
a. Go to the device's settings menu and select "system."
b. Select "system update" and accept any available software updates.
c. After the update is complete, go back to the settings menu and select "full system data reset."
d. Confirm the reset and wait for the device to restart.
Note: Ensuring all data is backup before carrying out the reset process is necessary because it will erase all data on the device. It is advisable to avoid using a non-original charger while resetting the device.
