How to reset or factory restore Celkon C66+ device?
To reset or factory restore a Celkon C66+ device, there are several methods available. Here are the most common and recommended ways:
1. Using the Power button:
a. Press and hold the Power button for 10-15 seconds until the device turns off.
b. Press and hold the Volume Down button for another 10-15 seconds.
c. Release the Volume Down button and press the Power button to enter recovery mode.
To exit recovery mode, press and hold the Volume Up button and the Power button together for 20 seconds.
2. Using a computer software:
a. Connect the Celkon C66+ device to a computer using a USB cable.
b. Open the Celkon C66+ device driver package provided by the manufacturer.
c. Install the C66+ recovery image file on the device using the software provided by the manufacturer.
d. Disk partition the device and format the partition to install the operating system.
e. Restore the operating system to the device while in recovery mode.
Note: This method requires technical knowledge and should only be attempted by experienced users. Restoring a device can cause data loss, so it is important to back up important data before proceeding with this method.
3. Using the recovery key:
a. If your Celkon C66+ device came with a recovery key, follow the instructions provided by the manufacturer to access the recovery mode using the key.
Note: This method is only recommended if you have lost your volume buttons and do not want to use the power button to reset your device.
These are the most common and recommended ways to reset or factory restore a Celkon C66+ device. It is important to note that restoring a device can cause data loss, so it is important to back up important data before attempting to restore your device.
