How to reset or factory restore Celkon C44+ device?
The Celkon C44+ is an Android device that can be reset or factory restored to its original settings. There are several methods you can use to do this, with the most common and recommended ways including:
Method 1: Reset to Factory Settings using Settings Menu
1. Open the Settings app on your Celkon C44+ device.
2. Scroll down and tap on the "Backup & reset" option.
3. Tap on the "Factory data reset" option.
4. Enter your PIN or pattern to confirm your identity.
5. Tap on "Reset device" to begin the reset process.
6. The device will now be reset to its factory settings and prompt you to set it up as a new device.
Method 2: Reset to Factory Settings using Volume Buttons
1. Power off your Celkon C44+ device.
2. Press and hold the Volume up button and the Power button at the same time.
3. Release the Volume up button, but continue to hold the Power button.
4. Wait for the Celkon C44+ logo to appear on the screen.
5. Release the Power button, and then press and hold the Volume down button.
6. Release the Volume down button when the "Yes -- delete all user data/factory reset" option appears.
7. Wait for the reset process to complete.
8. The device will now be reset to its factory settings and prompt you to set it up as a new device.
Note: This method may require a computer with specific software to perform the reset.
Method 3: Reset to Factory Settings using Bootloader
1. Open the Settings app on your Celkon C44+ device.
2. Scroll down and tap on the "About phone" option.
3. Scroll down and tap on the "Build number" option several times until the "You are now a developer!" message appears.
4. Go back to the main Settings menu and tap on the "Developer options" option.
5. Scroll down and tap on the "OEM unlocking" option.
6. Enable OEM unlocking and enter the required OEM unlocking key.
7. Connect your Celkon C44+ device to a computer using a USB cable.
8. Open a command prompt or terminal window on the computer.
9. Run the following command to check if the computer recognizes your device:
"adb devices"
10. If the device is recognized, run the following command to boot it into recovery mode:
"adb reboot recovery"
11. Once in recovery mode, select "Wipe data/factory reset" and confirm your decision.
12. Wait for the reset process to complete.
13. The device will now be reset to its factory settings and prompt you to set it up as a new device.
Note: This method requires specific software and the OEM unlocking key, which may be provided by the manufacturer. Additionally, this method may void your device's warranty and should only be used as a last resort if the other methods fail.
