Celkon C227

Home/ Celkon/ Phones/ C227

Table of Contents

Summary

Celkon C227 Price

The retail price of a new or used/second hand Celkon C227 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Celkon C227 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Celkon C227 device?

There are several ways to reset or factory restore a Celkon C227 device, but the most common and recommended methods are as follows: 1. Using the built-in "Heavy analysis" option: a. Turn off the device and wait for the batteries to drain completely. b. Select "Heavy analysis" from the recovery menu. c. Firmware Update d. Wipe dataused Factory data resetUsers must be careful when using Heavy Analysis because there is no guarantee to get the default software return. 2. Using a PC and a Reset link in recovery interface: a. Connect the device to a PC using a USB cable. b. Download the stock ROM for your Celkon C227. c. Boot the device into recovery mode. d. Select "Install Zip from SD card" and browse to the stock ROM on the computer. e. Choose "Select All" on the "Yes Publisher" screen. f. Press "Volume Up" to confirm installation, then press "Volume Down" to enter the recovery mode. g. Select "Install Zip" and browse to the Stock ROM on the computer. h. Press "Volume Up" to confirm installation, then press "Volume Down" to install the zip file. i. Reboot the device. 3. Using an external software: a. Download a compatible PC software like Odin or Haxplus. b. Connect the device to the PC with a USB cable. c. Open the software and select your device. d. Select Odin mode and reset the device. e. Wipe all user data before rebooting to stock ROM. It's important to note that all these methods will erase all data on the device, so make sure to backup your important data before performing a factory reset. Also, be cautious when using the Heavy Analysis option as there is no guarantee to get the default software return.