How to reset or factory restore Celkon C207 device?
To reset or factory restore a Celkon C207 device, you can use the following methods:
Method 1: Using the physical buttons
1. Turn off the device.
2. Press and hold the home button and the power button simultaneously for 10-15 seconds until the device enters recovery mode.
3. In recovery mode, select "Wipe Data/Factory Data Reset" from the list of options.
4. Confirm the operation by selecting "Yes - delete all user data".
5. Wait for the device to reset completely.
Method 2: Using a computer and the Celkon USB driver
1. Connect the Celkon C207 device to your computer using the provided USB cable.
2. Install the Celkon USB driver on your computer if it is not already installed.
3. Open a command prompt on your computer and navigate to the directory where the Celkon USB driver is installed.
4. Run the command "adb devices" to ensure that your computer can communicate with the device.
5. Run the command "adb reboot recovery" to enter recovery mode.
6. In recovery mode, select "Wipe Data/Factory Data Reset" from the list of options.
7. Confirm the operation by selecting "Yes - delete all user data".
8. Wait for the device to reset completely.
Method 3: Using the Celkon C207 recovery mode
1. Turn off the device.
2. Press and hold the home button and the power button simultaneously for 10-15 seconds until the device enters recovery mode.
3. In recovery mode, select "Wipe Data/Factory Data Reset" from the list of options.
4. Confirm the operation by selecting "Yes - delete all user data".
5. Wait for the device to reset completely.
It is recommended to use the first method as it is the most reliable and is less likely to cause any issues with your device. However, if you prefer using a computer, the second method is also acceptable. The third method should only be used if the other methods do not work.
