How to reset or factory restore Celkon C19 device?
Celkon C19 is a low-end smartphone, and when it comes to giving a hard reset or factory reset, it means deleting all user data and settings on the device. Restoring the device to its original state may cause loss of data and settings, so it should be done with caution. However, if you need to reset or factory reset your Celkon C19, here are the most common and recommended ways to do it:
1. Using the Hard Reset Option in Settings
To reset your Celkon C19 to its factory settings using the hard reset method, follow these steps:
1. Turn off your device completely.
2. Press and hold the power key and volume up button simultaneously until the Celkon logo appears on the screen.
3. Release the volume up button but continue to hold the power key until the Celkon recovery menu appears.
4. Select "Wipe data/factory reset" and confirm your action.
5. Wait for the device to restart.
Note: Be sure to back up all important data before you proceed with hard reset.
2. Using the Computer and Official Stock ROM
If the hard reset method fails or if you need to restore your device to its original state, you can use the computer and official stock ROM. Here's how you can do it:
1. Go to the Celkon website and download the official stock ROM for your device.
2. Check your device's battery level and make sure it's fully charged.
3. Connect the device to the computer and enable the USB debugging option on the device.
4. Install the latest USB drivers for your device on the computer.
5. Double-click the downloaded ROM file and select "Install Device ROM" from the pop-up window.
6. Wait for the device to restart and follow the prompts to set up your device.
Note: Be sure to back up all important data before you proceed with factory reset using this method.
In conclusion, both methods mentioned above can be used to reset or factory restore your Celkon C19 device. However, be sure to backup all important data before using any of the methods, and always use official stock ROM if available.
