How to reset or factory restore Celkon A900 device?
Resetting or factory restoring a Celkon A900 device can be a useful method to fix technical problems that are beyond software solutions or to start a new user experience. Before starting, it's important to note that resetting the device will erase all settings and data, including personal accounts, contacts, messages, and any apps that have been downloaded. Thus, it's recommended to create a backup of all important data before starting.
Here are the most common and recommended ways to reset or factory restore a Celkon A900 device:
1. Using the Volume and Power keys:
* Turn off the device by holding the power key for a few seconds.
* Hold the volume-up key and the power key simultaneously until the Celkon logo appears on the screen.
* Release the volume-up key and then release the power key.
* Wait for the device to restart and then press the volume-down key repeatedly to enter the recovery mode.
* Once in recovery mode, navigate to the "Wipe data/factory reset" option using the volume keys and select it with the power key.
* Confirm the action by selecting "Yes" with the power key.
* The device will start resetting and may take a few minutes to complete the process.
2. Using a computer:
* Connect the Celkon A900 device to a computer via USB cable.
* Go to the Celkon website and download the appropriate USB driver for your device.
* Install the USB driver on your computer.
* Open a command prompt window and type the following command to ensure that the device is detected on your computer:
```
adb devices
```
* If the device is detected, enter the following command to enter the recovery mode:
```
adb reboot recovery
```
* If the device enters the recovery mode, you can follow the same steps as above to reset the device.
3. Using the hardware buttons:
* Turn off the device by holding the power key for a few seconds.
* Press and hold the volume-up key and the power key simultaneously for a few seconds until the device starts evacuating the memory.
* Release the volume-up key and then release the power key.
* Wait for the device to turn on completely and then press and hold the volume-down key and the power key simultaneously for a few seconds until the recovery mode appears on the screen.
* Once in recovery mode, navigate to the "Wipe data/factory reset" option using the volume keys and select it with the power key.
* Confirm the action by selecting "Yes" with the power key.
* The device will start resetting and may take a few minutes to complete the process.
It's important to note that the recovery mode process may vary depending on the specific version of Android installed on your Celkon A900 device. It's always recommended to refer to the device's user manual for detailed instructions.
