How to reset or factory restore Bosch 909 Dual S device?
There are several methods to reset or factory restore a Bosch 909 Dual S device, depending on the specific situation and problem you are encountering. Here are the most common and recommended ways:
1. Resetting the device with the original factory programming disk:
* Ensure that the device is properly connected to the computer with a USB cable.
* Install the latest firmware software onto the computer.
* Open the Bosch Service Tech software and connect to the device using the integrated serial communication.
* Select "Internals" -> "Reset Device Settings."
* Select "Yes" to confirm the reset.
* Wait for the device to reset and finish rebooting.
2. Resetting the device using the wireless remote:
* Turn on the wireless remote and press and hold the power button until the device stops flashing or displays the "Locked Down" message.
* Press and hold the power button until the device stops flashing or displays the "Safe Mode" message.
* Once the device is in Safe Mode, press the "Ergon" button until the dials start spinning rapidly.
* Press the "Set" button until the dials stop spinning.
* Hold the power button down until the device reboots.
3. Resetting the device manually (without the original factory programming disk or wireless remote):
* Turn on the device and let it charge for a few hours.
* Press and hold the "Set" button and the "Cf2" button (the button with the headphones symbol) simultaneously until the device stops flashing or displays the "Safe Mode" message.
* Once the device is in Safe Mode, press the "Ergon" button until the dials start spinning rapidly.
* Press the "Set" button until the dials stop spinning.
* Hold the power button down until the device reboots.
It's important to note that resetting your Bosch 909 Dual S device will erase all your previously saved settings and data. Do this only if you have no other option to fix the problem. Always make sure to backup your data before resetting the device.
