How to reset or factory restore Bosch Com 738 device?
Bosch Com 738 devices are popular cordless drills and other power tools that offer a range of features and settings. However, if you ever need to reset or factory restore your device, there are a few common and recommended methods you can try.
Method 1: Resetting the device settings to the factory default values
1. Remove the battery from the tool by pressing the battery release button until the battery hangs down.
2. Press and hold the power button for 20 seconds to enter the tool's service mode.
3. Press and hold the "Menu" button while also pressing the "Power" button to autosave the current settings.
4. Use the "Enter" button to go through the settings menu and locate the "Reset All Settings" option.
5. Press the "Enter" button to confirm the setting and wait for the tool to reset.
6. Reinstall the battery and try using the tool again.
Method 2: Resetting the device entirely (factory reset)
1. Remove the battery from the tool by pressing the battery release button until the battery hangs down.
2. Press and hold the power button for 20 seconds to enter the tool's service mode.
3. Press and hold the "Menu" button while also pressing the "Power" button to autosave the current settings.
4. Locate the "Reset Factory Settings" option in the tool's service menu and press the "Enter" button to confirm the setting.
5. Wait for the tool to reset, then reinstall the battery and try using the tool again.
It's important to note that factory resetting a device will erase all stored data and personal settings, so it should only be used as a last resort. In most cases, simply resetting the device settings to the factory default values will be sufficient.
