How to reset or factory restore BLU Studio C 5 + 5 device?
If you need to reset or factory restore your BLU Studio C5 + 5 device, here are the most common and recommended methods:
Method 1: Soft Reset
To perform a soft reset, follow these steps:
1. Press and hold the power button for 20-30 seconds until the device turns off.
2. Disconnect any headphones or external accessories.
3. Press and hold the power button for a few seconds, then release it.
4. Press and hold the power button again for a few seconds until the device turns off.
5. Wait for a few minutes, then press and hold the power button to turn the device back on.
This will reset your device to its default settings and will erase all data on the device.
Method 2: Bootloader Reset
To perform a bootloader reset, you will need to connect your device to a computer and use a software tool such as Fastboot or SP Flasher.
1. Connect your device to a computer using a USB cable.
2. Open the command prompt and navigate to the directory where the Fastboot or SP Flasher executable file is located.
3. Type the following command to check the serial port of your device: fastboot devices
4. Once the serial port is detected, type the following command to boot the device into recovery mode: fastboot reboot recovery
5. Once the device is in recovery mode, you can then choose to wipe the data/factory data to reset the device to its default settings.
Method 3: Using Hardware Buttons
To perform a hardware reset, you will need to use the power and volume buttons on your device.
1. Turn off the device by pressing the power button.
2. Press and hold the power button for 30 seconds, then press and hold the volume up button.
3. Release the power button, then press and hold the volume up button for a few seconds until the device boots into recovery mode.
4. Once the device is in recovery mode, you can then choose to wipe the data/factory data to reset the device to its default settings.
It is important to note that a hardware reset will erase all data on the device, including any important files or settings, so it should only be performed if you have exhausted all other options and want to completely start over with the device.
