Apple Watch Sport 42mm (1st gen)

Home/ Apple/ Phones/ Watch Sport 42mm (1st gen)

Table of Contents

Summary

Apple Watch Sport 42mm (1st gen) Price

At the time of it's release in 2015, April, the manufacturer's retail price for a new Apple Watch Sport 42mm (1st gen) was about 250 EUR.

The retail price of a new or used/second hand Apple Watch Sport 42mm (1st gen) varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Apple Watch Sport 42mm (1st gen) across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What type of bands are compatible with the Apple Watch Sport 42mm (1st gen)?

The Apple Watch Sport 42mm (1st gen) is compatible with all Apple Watch bands.

How to reset or factory restore a Apple Watch Sport 42mm (1st gen) device?

To reset or factory restore an Apple Watch Sport 42mm (1st gen), follow these steps: 1. Charge the watch: Make sure your Apple Watch Sport 42mm (1st gen) is fully charged. 2. Open the Watch app on your iPhone: Go to the Watch tab on the Home screen of your iPhone and open the Watch app. 3. Connect your watch to Wi-Fi: Make sure your Apple Watch Sport 42mm (1st gen) is connected to Wi-Fi. You can check this by opening the Settings app on the watch and scrolling down until you see Wi-Fi. 4. Scroll down to General and select Factory Reset: On the Watch app on your iPhone, click on the General tab on the bottom right-hand corner of the screen. Select Factory Reset by tapping on Clean Installation. 5. Enter your Apple ID and password: Enter your Apple ID and password when prompted. This is an important step, as it will ensure that your watch is reset to its original state and your data is protected. 6. Wait for the installation process: It may take a few minutes for the installation process to complete. Once it's done, your Apple Watch Sport 42mm (1st gen) will be reset to its original state. 7. Set up your watch: After the installation process is complete, you'll need to set up your watch. During this process, you'll be prompted to enter your Apple ID, name, and other personal information. Follow the on-screen prompts to complete the setup process. 8. Backup your data: It's always a good idea to backup your data before performing a factory reset. This will ensure that you don't lose any important information when resetting your watch. You can backup your data using Apple's backup service or a computer program like Apple Watch Manager.

What type of processor does the Apple Watch Sport 42mm (1st gen) have?

The Apple Watch Sport 42mm (1st gen) has a dual-core S1P processor.

What type of display does the Apple Watch Sport 42mm (1st gen) have?

The Apple Watch Sport 42mm (1st gen) has a Retina display with Force Touch.

Specifications

Network

Technology: No cellular connectivity
2G bands: N/A
GPRS: No
EDGE: No

Launch

Announced: 2014, September. Released 2015, April
Status: Discontinued

Body

Dimensions: 42 x 35.9 x 10.5 mm (1.65 x 1.41 x 0.41 in)
Weight: 30 g body (2.47 oz)
Build: Glass front, composite plastic back, aluminum frame
SIM: No
: IPX7 water resistant up to 1 meter and 30 minutes

Display

Type: Retina OLED, 450 nits (peak)
Size: 1.65 inches
Resolution: 390 x 312 pixels (~302 ppi density)
Protection: Ion-X strengthened glass
: 3D Touch display

Platform

OS: watchOS 1.0, upgradable to 4.3.2
Chipset: Apple S1 (28 nm)
CPU: 520 MHz Cortex-A7
GPU: PowerVR SGX543

Memory

Card slot: No
Internal: 8GB 512MB RAM

Camera

: No

Sound

Loudspeaker: Yes
3.5mm jack: No

Comms

WLAN: Wi-Fi 802.11 b/g/n
Bluetooth: 4.0, LE
Positioning: No
NFC: Yes
Radio: No
USB: No

Features

Sensors: Accelerometer, gyro, heart rate
: Natural language commands and dictation

Battery

Type: Li-Ion 250 mAh (0.94 Wh), non-removable
Charging: Wireless

Misc

Colors: Silver/White, Orange, Blue; Gray/Black; Rose Gold/Lavender, Stone; Gold/White, Blue, Yellow, Apricot, Royal Blue, Pink/Royal Blue/Gold&Red/Black Woven Nylon
Models: A1554
Price: About 250 EUR