Allview V2 Viper X+

Name: Allview V2 Viper X+
Brand: Allview
Price: 300 EUR

Home/ Allview/ Phones/ V2 Viper X+

Allview V2 Viper X+ image - Nikonet125.com — An image of the Allview V2 Viper X+.

Table of Contents

Summary

The Allview V2 Viper X+ is a discontinued dual SIM smartphone with a 5.5 inch AMOLED display, a resolution of 720 x 1280 pixels, and a 16:9 ratio. It has a Mediatek MT6753 chipset, an Octa-core 1.3 GHz Cortex-A53 processor, a Mali-T720 GPU, 3GB RAM, 16GB internal storage, and a microSDXC card slot. It has a 13MP rear camera with LED flash and HDR, and a 5MP front camera. It has a Li-Po 3150 mAh removable battery, and runs on Android 5.1 (Lollipop). It has a 154 x 77 x 7.2 mm body and weighs 155.3 g.

Allview V2 Viper X+ Price

At the time of it's release in 2015, October, the manufacturer's retail price for a new Allview V2 Viper X+ was about 300 EUR. Click here to discover the current price of Allview V2 Viper X+ in 🇺🇸 US.

The retail price of a new or used/second hand Allview V2 Viper X+ varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Allview V2 Viper X+ across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Allview V2 Viper X+?

3000 mAh

What is the processor of Allview V2 Viper X+?

Octa-core 1.3 GHz Cortex-A53

Does Allview V2 Viper X+ support 4G LTE?

Yes

How to reset or factory restore a Allview V2 Viper X+ device?

The most common and recommended ways to reset or factory restore a Allview V2 Viper X+ device are as follows: Method 1: Using the built-in recovery mode 1. Charge the Allview V2 Viper X+ device to at least 50% battery level. 2. To enter recovery mode, turn off the device, then press and hold the power button and the volume up button simultaneously for about 10 seconds until the phone enters recovery mode. Alternatively, you can use the Volume down button instead of the Volume up button. 3. Once in recovery mode, select "Wipe data/factory reset" and "Yes, – delete all user data". This will erase all data on the device and restore it to its original factory settings. 4. Wait for the device to reboot. Method 2: Using a Windows PC 1. Connect the Allview V2 Viper X+ device to your Windows PC using a USB cable. 2. Download the appropriate Allview V2 Viper X+ drivers from the manufacturer's website. 3. Install the drivers on your PC. 4. Install the Allview V2 Viper X+ recovery firmware on your PC using the appropriate recovery image file. 5. Turn off the Allview V2 Viper X+ device. 6. Press and hold the power button and the Volume down button simultaneously until the phone enters recovery mode. 7. Once in recovery mode, select "Install from SD card" and "User data". 8. Select the recovery image file you installed in step 4. 9. Wait for the device to reboot. Note: Resetting or factory restoring your device will erase all data and personal settings. Be sure to backup any important data before proceeding with the reset process.

Specifications

Network

Technology	GSM / HSPA / LTE
2G bands	GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands	HSDPA 900 / 1900 / 2100
4G bands	1, 3, 7, 20, 39, 40, 41
Speed	HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps

Launch

Announced	2015, October. Released 2015, October
Status	Discontinued

Body

Dimensions	154 x 77 x 7.2 mm (6.06 x 3.03 x 0.28 in)
Weight	155.3 g (5.47 oz)
SIM	Dual SIM (Micro-SIM, dual stand-by)

Display

Type	AMOLED
Size	5.5 inches, 83.4 cm2 (~70.3% screen-to-body ratio)
Resolution	720 x 1280 pixels, 16:9 ratio (~267 ppi density)
Protection	Corning Gorilla Glass 3