Allview P8 Energy mini

Home/ Allview/ Phones/ P8 Energy mini

Table of Contents

Summary

Allview P8 Energy mini Price

At the time of it's release in 2016, January, the manufacturer's retail price for a new Allview P8 Energy mini was about 170 EUR.

The retail price of a new or used/second hand Allview P8 Energy mini varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Allview P8 Energy mini across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Allview P8 Energy mini?

3000 mAh

How to reset or factory restore a Allview P8 Energy mini device?

The Allview P8 Energy Mini is a smartphone that runs on the Android 10 operating system. If you need to reset or factory restore your device, there are two recommended methods that you can try. These methods will erase all data on your device and restore it to its original factory settings. Method 1: Using the Recovery Mode 1. Turn off your Allview P8 Energy Mini device. 2. Press and hold the Volume Up key and the Power key simultaneously until you see the recovery mode icon on your screen. 3. Release both buttons and wait for the recovery mode to load. 4. Once the recovery mode is loaded, select "Wipe data/factory data" using the Volume keys and press the Power key to confirm. 5. Wait for the device to erase all data and restore to factory settings. 6. Once the erasure is complete, select "Reboot system" and press the Power key to confirm. 7. Wait for your device to restart and you should be greeted with the welcome screen. Method 2: Using a Computer and USB Cable 1. Connect your Allview P8 Energy Mini device to your computer using a USB cable. 2. Make sure that you have the latest version of Android SDK installed on your computer. 3. Open a command prompt window on your computer and navigate to the directory where the USB cable is connected. 4. Type the command "adb devices" and press Enter. This should list your device in the command prompt. 5. Type the command "fastboot reset" and press Enter. This will erase all data on your device and restore it to factory settings. 6. Wait for the device to erase all data and restart. 7. Once the device has restarted, disconnect the USB cable and remove the battery from your device. 8. Press and hold the Power key until your device turns on again. Note: Before resetting or factory restoring your device, make sure to backup any important data that you do not want to lose. Also, be aware that you will need to set up your device from scratch after a factory reset.

What is the processor of Allview P8 Energy mini?

Octa-core 1.3 GHz Cortex-A53

Does Allview P8 Energy mini support 4G LTE?

Yes

Specifications

Network

Technology: GSM / HSPA
2G bands: GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands: HSDPA 900 / 1900 / 2100
Speed: HSPA 21.1/5.76 Mbps

Launch

Announced: 2016, January. Released 2016, January
Status: Discontinued

Body

Dimensions: 143.3 x 72 x 8.9 mm (5.64 x 2.83 x 0.35 in)
Weight: 200 g (7.05 oz)
SIM: Dual SIM (Micro-SIM, dual stand-by)

Display

Type: IPS LCD
Size: 5.0 inches, 68.9 cm2 (~66.8% screen-to-body ratio)
Resolution: 720 x 1280 pixels, 16:9 ratio (~294 ppi density)
Protection: Asahi Dragontrail Glass