What are the main features of the Allview L4 Class?
The Allview L4 Class features a 5.45-inch display, a quad-core processor, 1GB of RAM, 8GB of internal storage, and a 5MP rear camera.
How to reset or factory restore a Allview L4 Class device?
There are two common ways to reset or factory restore a Allview L4 Class device:
1. Using Hardware Reset:
To reset the device to its factory settings using a hardware reset, you will need access to a computer or laptop with a USB cable. You will also need to install the device driver for your Allview L4 Class device on the computer or laptop. Once you have the driver installed, follow these steps:
a. Turn off your Allview L4 Class device completely.
b. Connect your device to the computer or laptop using a USB cable.
c. Open the Device Manager on your computer or laptop, and locate your device. Right-click on it and select "Properties".
d. In the properties menu, select "Device Reset".
e. Click on "Reset Device" and follow the prompts.
f. Once the device has been reset, disconnect it from the computer or laptop and turn it back on. Follow the on-screen prompts to set up your device as if it is new.
2. Using the Factory Reset Option:
To reset the device to its factory settings using the built-in factory reset option, you will need to go to the recovery mode. To do this, follow these steps:
a. Turn off your Allview L4 Class device completely.
b. Press and hold the Volume Up key and the Power button simultaneously until the recovery mode appears on your device.
c. In the recovery mode, select "Wipe data/factory reset" using the volume keys.
d. Confirm the reset by pressing the Power key.
e. Once the device has been reset, reboot it and follow the on-screen prompts to set up your device as if it is new.
Note: Before performing a factory reset, it is recommended to back up your important data to an external backup device or cloud storage service. A factory reset will erase all data and settings on your device, including contacts, messages, photos, and app data.
