ZTE Tempo Go

Home/ ZTE/ Phones/ Tempo Go

Table of Contents

Summary

ZTE Tempo Go Price

At the time of it's release in 2018, March, the manufacturer's retail price for a new ZTE Tempo Go was about 80 EUR.

The retail price of a new or used/second hand ZTE Tempo Go varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of ZTE Tempo Go across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the ZTE Tempo Go?

The ZTE Tempo Go has a 2,200 mAh battery capacity.

What type of display does the ZTE Tempo Go have?

The ZTE Tempo Go has a 5-inch LCD display.

What version of Android does the ZTE Tempo Go run?

The ZTE Tempo Go runs Android 8.1 Oreo.

How to reset or factory restore ZTE Tempo Go device?

Sure, here are the most common and recommended ways to reset or factory restore a ZTE Tempo Go device: 1. Hard Reset: This is the most common and recommended method to reset a ZTE Tempo Go device. To hard reset the device, follow these steps: a. Power off the device. b. Press and hold the Volume Up button and the Power button simultaneously. c. Release both buttons when the ZTE logo appears on the screen. d. Use the Volume button to navigate to "wipe data/factory reset" and press the Power button to select it. e. Use the Volume button to select "Yes - delete all user data" and press the Power button to confirm. f. Wait for the device to reset. 2. Soft Reset: This method resets the device without losing any data. To soft reset the device, follow these steps: a. Press and hold the Power button and the Volume Down button simultaneously. b. Release both buttons when the ZTE logo appears on the screen. c. Use the Volume button to navigate to "reboot system" and press the Power button to select it. d. Wait for the device to reboot. 3. Bootloader: This method allows you to reset the device to its factory settings by bootloading a custom recovery image. To bootloader the device, follow these steps: a. Download and install the stock firmware on your computer. b. Connect the device to your computer using a USB cable. c. Open a command prompt and navigate to the folder where the firmware file is located. d. Type "fastboot boot [stock firmware file]" and press Enter. e. Wait for the device to boot into the custom recovery image. f. Use the Volume button to navigate to "wipe data/factory reset" and press the Power button to select it. g. Use the Volume button to select "Yes - delete all user data" and press the Power button to confirm. h. Wait for the device to reset. It is important to note that any data on the device will be lost when you factory reset it. Always make sure to backup any important data before performing any factory reset.

Specifications

Network

Technology: GSM / CDMA / HSPA / LTE
2G bands: GSM 850 / 1900
: CDMA 800 / 1900
3G bands: HSDPA 850 / 1700(AWS) / 1900
4G bands: 2, 4, 5, 12, 13, 25, 26, 41
Speed: HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps