ZTE Tania

Home/ ZTE/ Phones/ Tania

Table of Contents

Summary

ZTE Tania Price

At the time of it's release in 2012, February, the manufacturer's retail price for a new ZTE Tania was about 210 EUR.

The retail price of a new or used/second hand ZTE Tania varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of ZTE Tania across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What type of processor does the ZTE Tania have?

The ZTE Tania has a 1GHz processor.

How to reset or factory restore ZTE Tania device?

If you want to reset or factory restore a ZTE Tania device, there are two common ways to do so: Method 1: Using the recovery menu To use this method, you will need a PC and a USB cable. Follow these steps: 1. Connect the ZTE Tania device to the PC using the USB cable. 2. Open the Universal Serial Bus (USB) configuration utility on the PC and make sure that the device is recognized. 3. Go to the recovery menu of the ZTE Tania device by following these steps after turning on the phone: Press and hold down the volume up and power buttons at the same time until the battery goes down. Once the battery goes down, the ZTE Tania logo will appear on the screen. Press and hold the power button until the recovery menu appears. 4. Select "Wipe data/factory reset" and confirm your choice. This will erase all data and settings on the device. 5. Reflash the firmware: Once you have successfully wiped the data, select "Update Firmware" and follow the instructions provided on the screen. Method 2: Using the bootloader To use this method, you will need a PC and a USB cable. Follow these steps: 1. Connect the ZTE Tania device to the PC using the USB cable. 2. Open the Universal Serial Bus (USB) configuration utility on the PC and make sure that the device is recognized. 3. Go to the bootloader of the ZTE Tania device by following these steps after turning on the phone: Press and hold down the volume up and power buttons at the same time until the bootloader screen appears. 4. Upload the firmware: Select "Load firmware" and select the firmware file that you downloaded from the ZTE website. The firmware file can be found in the "FIRMWARE" folder on the ZTE website. 5. Reboot the device: After the firmware has been uploaded successfully, reboot the device by selecting "Reboot" from the bootloader menu. Both methods should factory reset your ZTE Tania device. Note that factory resetting your device will remove all data and settings on the device, so make sure to backup any important data before proceeding. Additionally, make sure to download the firmware from the official ZTE website to avoid any potential security risks.

What type of display does the ZTE Tania have?

The ZTE Tania has a 4.3 inch capacitive touchscreen display.

What type of operating system does the ZTE Tania have?

The ZTE Tania has Windows Phone 7.5 operating system.

Specifications

Network

Technology: GSM / HSPA
2G bands: GSM 900 / 1800 / 1900
3G bands: HSDPA 900 / 2100
Speed: HSPA 14.4/5.76 Mbps

Launch

Announced: 2011, September. Released 2012, February
Status: Discontinued

Body

Dimensions: 128.6 x 67.8 x 10.5 mm (5.06 x 2.67 x 0.41 in)
Weight: 158 g (5.57 oz)
SIM: Mini-SIM

Display

Type: TFT
Size: 4.3 inches, 52.6 cm2 (~60.4% screen-to-body ratio)
Resolution: 480 x 800 pixels, 5:3 ratio (~217 ppi density)

Platform

OS: Microsoft Windows Phone 7.5 Mango
Chipset: Qualcomm MSM8255 Snapdragon S2
CPU: 1.0 GHz Scorpion
GPU: Adreno 205

Memory

Card slot: No
Internal: 4GB 512MB RAM

Main Camera

Single: 5 MP, AF
Features: LED flash
Video: 720p@30fps

Selfie camera

: No

Sound

Loudspeaker: Yes
3.5mm jack: Yes

Comms

WLAN: Wi-Fi 802.11 b/g/n
Bluetooth: 3.0, A2DP, EDR
Positioning: GPS, A-GPS
Radio: Stereo FM radio, RDS
USB: microUSB 2.0

Features

Sensors: Accelerometer, proximity, compass
: MP3/WAV/eAAC+/WMA player MP4/H.264/WMV player Document viewer Voice memo/command/dial Predictive text input