ZTE Cymbal U

Home/ ZTE/ Phones/ Cymbal U

Table of Contents

Summary

ZTE Cymbal U Price

At the time of it's release in 2021, January, the manufacturer's retail price for a new ZTE Cymbal U was about 70 EUR.

The retail price of a new or used/second hand ZTE Cymbal U varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of ZTE Cymbal U across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the ZTE Cymbal U?

The ZTE Cymbal U has a battery capacity of 2000 mAh

What is the display size of the ZTE Cymbal U?

The ZTE Cymbal U has a 3.5 inch display

How to reset or factory restore ZTE Cymbal U device?

To reset or factory restore a ZTE Cymbal U device, you can follow these steps: Method 1: Using the hardware buttons 1. Turn off your ZTE Cymbal U device by pressing and holding the power button for about 10 seconds until the screen goes black. 2. Press and hold the power button and the volume up button together for about 30 seconds. 3. Release both buttons and wait for the device to restart. 4. Wait for the "Recovery mode" to appear on the screen. 5. Press and hold the power button again to re-enter recovery mode. 6. Use the volume buttons to navigate to "wipe data/factory reset." 7. Use the inscription button (usually the power button) to select yes to wipe data/factory reset. 8. Wait for the device to reset to its factory settings. Method 2: Using the ZTE Custom Recovery Menu 1. Download and install ZTE Custom Recovery Menu on your PC. 2. Connect your ZTE Cymbal U device to your PC using a micro-USB cable. 3. Open the ZTE Custom Recovery Menu on your PC. 4. Select "Backup or Restore" and then "Restore" from the menu. 5. Choose the "MicroSD Card" option if you have used one to back up your device. 6. Select the pre-installed recovery image from the menu. 7. Click "Start" to begin the restoration process. 8. Wait for the device to reset to its factory settings. Method 3: Using the ZTE Mecto Recovery Menu 1. Download and install ZTE Mecto Recovery Menu on your PC. 2. Connect your ZTE Cymbal U device to your PC using a micro-USB cable. 3. Open the ZTE Mecto Recovery Menu on your PC. 4. Select "Backup or Restore" and then "Restore" from the menu. 5. Choose "Use Firmware Found on External SD" if you have used one to back up your device. 6. Select the "Mecto Recovery Image" and then "Start" to begin the restoration process. 7. Wait for the device to reset to its factory settings. Note: Use these methods at your own risk as they will erase all data on your device. Make sure to back up any important data before factory resetting your device. It is also recommended to use the official recovery images and custom recovery menus from ZTE's official website to avoid any potential damage to your device.

What is the processor of the ZTE Cymbal U?

The ZTE Cymbal U is powered by a Qualcomm Snapdragon 210 processor

Specifications

Network

Technology: GSM / HSPA / LTE
2G bands: GSM 850 / 1900
3G bands: HSDPA 850 / 1700(AWS) / 1900
4G bands: 2, 4, 5, 12, 41, 66, 71
Speed: HSPA, LTE Cat4 150/50 Mbps

Launch

Announced: 2021, January
Status: Available. Released 2021, January

Body

Dimensions: 109.2 x 55.9 x 19.5 mm (4.30 x 2.20 x 0.77 in)
Weight: -
SIM: Nano-SIM

Display

Type: TFT LCD
Size: 2.8 inches, 24.3 cm2 (~39.8% screen-to-body ratio)
Resolution: 240 x 320 pixels, 4:3 ratio (~143 ppi density)
: Cover display: TFT LCD, 1.70 inches