ZTE Blade A601

Home/ ZTE/ Phones/ Blade A601

Table of Contents

Summary

ZTE Blade A601 Price

At the time of it's release in 2016, July, the manufacturer's retail price for a new ZTE Blade A601 was about 80 EUR.

The retail price of a new or used/second hand ZTE Blade A601 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of ZTE Blade A601 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the ZTE Blade A601?

The ZTE Blade A601 has a 2,400 mAh battery capacity.

What type of display does the ZTE Blade A601 have?

The ZTE Blade A601 has a 5.2-inch IPS LCD display.

What version of Android does the ZTE Blade A601 run?

The ZTE Blade A601 runs Android 7.1.1 Nougat.

How to reset or factory restore ZTE Blade A601 device?

To reset or factory restore a ZTE Blade A601 device, follow the steps below: 1. Charge the device to at least 50% battery levels. 2. Turn off the device by pressing and holding the power button until the phone turns off. 3. Connect the device to your computer using a USB cable. 4. On your computer, navigate to My Computer > Device Manager, find the USB serial port connected to the device, and right-click. Select Update Driver. 5. In the popup, select "ZTE USB viewers and manager" then click OK. 6. In ZTE USB drivers, select Lowest common version and click Install. 7. Backup any important files and data from the device. 8. On your computer, go to ZTE Service Center, click on Downloads and select ZTE A601F_05_25.exe, which is the firmware uploading tool for the ZTE Blade A601. Save the file on your computer. 9. Run the firmware uploading tool on your computer. Select your device, browse to PATH_TO_FIRMWARE, select firmware and click on Upload Options. Select Force Update, and click on Upload. 10. Wait for the firmware upload to complete. Disconnect the device from your computer after the update is complete (it may take 10-20 minutes). 11. Turn on the device by pressing the power button. Wait until the device turns on. 12. You may need to wait for the firmware to load, which can take a few minutes. Once the device starts, go to Settings > Backup & reset > Factory Data Reset and reset the device. Note: Factory reset will erase all data and settings from the device, and you will need to set up the device from scratch. Make sure to backup important files and data before resetting the device. Also, follow these steps at your own risk.

Specifications

Network

Technology: GSM / HSPA / LTE
2G bands: GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands: HSDPA 900 / 1900 / 2100
4G bands: LTE (unspecified)
Speed: HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps