How to reset or factory restore ZTE Axon 50 Ultra device?
A ZTE Axon 50 Ultra device can be factory reset or its settings can be restored to their original state. This can be useful in various situations, such as when the device is suffering from software issues or if it has been password protected and the user has forgotten the password. This guide will discuss the most common and recommended ways to reset or factory restore a ZTE Axon 50 Ultra device.
Method 1: Using the Volume and Power Buttons
To perform a factory reset using the volume and power buttons, follow these steps:
1. Turn off the device by holding the power button down for 10 seconds.
2. Press and hold the volume up button and power button at the same time.
3. Release the buttons when the ZTE logo appears.
4. Use the volume buttons to navigate through the options and press the power button to select.
5. Select the "Factory Data Reset" option and press the power button to confirm.
6. Wait for the device to reset, which may take several minutes.
Note: This method requires the device to be in recovery mode. Recovery mode can be accessed by holding the power button down for 10 seconds until the ZTE logo appears. You'll also need to have a backup of any important data, as a factory reset will wipe all the data on the device.
Method 2: Using a Computer and the stock firmware
To perform a factory reset using a computer, you'll need to download the stock firmware for the ZTE Axon 50 Ultra device from the manufacturer's website. Once you've downloaded the firmware, follow these steps:
1. Connect the ZTE Axon 50 Ultra device to the computer using a USB cable.
2. Open a command prompt and navigate to the directory where the firmware file is located.
3. Run the following command to enter recovery mode: fastboot oem name Android
4. Run the following command to enter recovery mode: fastboot oem tool
5. Select "Factory Reset" and confirm.
6. Wait for the device to reset, which may take several minutes.
Note: Before proceeding with this method, make sure to enable USB debugging on the device. To do this, go to Settings > About Phone > Build Number and tap it several times until you see the "You are now a developer!" message. Then, go to Settings > Developer Options > USB Debugging and turn it on. Also, be sure to use the correct firmware for your device.
Method 3: Using a Third-party App
There are several third-party apps available that can be used to perform a factory reset on a ZTE Axon 50 Ultra device. One popular option is the Wipe Data/Factory Reset app, which can be found on the Google Play Store. To use this app, follow these steps:
1. Install the Wipe Data/Factory Reset app on your device.
2. Open the app and tap on the "Factory Reset" or "Wipe Data" option.
3. Confirm and wait for the device to reset.
Note: Be sure to read the app's reviews before installing it to ensure it is safe to use. Additionally, be aware that a factory reset will erase all the data on the device, so it's important to have a backup if needed.
