How to reset or factory restore Yezz Z50 device?
The Yezz Z50 is a dual-SIM smartphone that runs on the Android operating system. If you want to reset or factory restore your Yezz Z50 device, there are several methods available. The most common and recommended ways are:
Method 1: Using the Physical Buttons
To reset your Yezz Z50 device using the physical buttons, follow these steps:
1. Turn off your device completely by pressing and holding the power button until the phone turns off.
2. Press and hold the power button + volume down button for 10 seconds until you see the Yezz bootloader screen.
3. Select "Recovery mode" using the Volume keys and press the Power button.
4. In recovery mode, select "Wipe data/factory reset" using the Volume keys and press the Power button.
5. Confirm the factory reset by selecting "Yes" and press the Power button.
6. Wait for the device to reset itself entirely.
Method 2: Using ADB
To reset your Yezz Z50 device using ADB, follow these steps:
1. Connect your device to your computer using a USB cable.
2. Install Android SDK and USB drivers on your computer.
3. Open a command prompt and navigate to the folder where you installed the ADB software.
4. Verify that ADB is connected to your device by typing "adb devices" and press enter. You should see your device listed.
5. Back up your data if you have any important files you need to keep.
6. Reboot your device into recovery mode by typing "adb reboot recovery" and press enter.
7. In recovery mode, select "Wipe data/factory reset" using the Volume keys and press the Power button.
8. Confirm the factory reset by selecting "Yes" and press the Power button.
9. Wait for the device to reset itself entirely.
Method 3: Using OTA (Over-the-Air) Update
To reset your Yezz Z50 device using an OTA (Over-the-Air) update, follow these steps:
1. Open the Settings app on your device.
2. Go to "System & Security" and then "System update."
3. If an OTA update is available, select "Download and install" and follow the instructions to complete the update.
4. Wait for the update to download and install on the device.
5. Your device will automatically reboot after the update is complete.
6. Wait for the device to restart and log in to your account.
Note: Resetting your Yezz Z50 device will erase all your data, so it's important to back up your important files before resetting the device. Additionally, resetting the device may void your warranty, so be sure to understand the risks before you start the process.
