How to reset or factory restore Yezz Max 2 Plus device?
To reset or factory restore a Yezz Max 2 Plus device, you can follow any of the following methods:
Method 1: Using Hardware Recovery Mode
1. Turn off your Yezz Max 2 Plus device completely.
2. Press the Volume down button and the Power button simultaneously for 5-10 seconds until the device enters Hardware Recovery Mode.
3. Use the Volume buttons to navigate through the menu, and select "Reset base of system" from the "Wipe user data/factory reset" option.
4. Confirm the action by selecting "Yes - delete all user data" using the Volume buttons.
5. Wait for the device to erase all data and return to the bootloader.
6. Connect your device to your computer using a compatible cable.
7. Open a recovery software (such as ADB or Fastboot) and enter the recovery mode of your device.
8. Once in recovery mode, select "Reboot system" and wait for the device to start up again.
Method 2: Using the Power Button and Volume Keys
1. Turn off your Yezz Max 2 Plus device completely.
2. Press and hold the Power button and the Volume down button simultaneously for 10 seconds until the device enters Hardware Recovery Mode.
3. Use the Volume buttons to navigate through the menu, and select "Reset base of system" from the "Wipe user data/factory reset" option.
4. Confirm the action by selecting "Yes - delete all user data" using the Volume buttons.
5. Wait for the device to erase all data and return to the bootloader.
6. Connect your device to your computer using a compatible cable.
7. Open a recovery software (such as ADB or Fastboot) and enter the recovery mode of your device.
8. Once in recovery mode, select "Reboot system" and wait for the device to start up again.
Method 3: Using the ADB Command
1. Connect your Yezz Max 2 Plus device to your computer using a compatible cable.
2. Install ADB and Fastboot on your computer.
3. Open a command prompt or terminal window.
4. Navigate to the directory where your device driver software is installed.
5. Use the command "adb devices" to verify that your device is recognized by ADB.
6. Enter the "adb reboot recovery" command to reboot into recovery mode.
7. Once in recovery mode, select "Wipe data/factory reset" and confirm the action.
8. Reboot your device by selecting "Reboot system" in recovery mode.
Note: Using the Hardware Recovery Mode or Volume Keys method may require your device to have a sufficient battery charge before attempting a reset or factory restore. It is also recommended to back up your important data before resetting your device.
