How to reset or factory restore Yezz GO 1 device?
To reset or factory restore a Yezz GO 1 device, you can try the following methods:
Method 1: Using the Hardware Reset Button
1. Locate the hardware reset button on the back of the device. It is usually a small button marked "Reset".
2. Insert a paper clip or a needle into the small hole next to the reset button.
3. Press and hold the reset button for a few seconds until the device restarts.
4. Wait for the device to boot up and go through the initial setup process.
Method 2: Using a Computer and the Yezz GO Android Application
1. Connect the Yezz GO 1 device to your computer using a USB cable.
2. Install the Yezz GO Android Application on your computer by downloading it from the official website.
3. Open the application and follow the on-screen instructions to create a backup of your device.
4. Once you have the backup, select the "Reset to Factory Settings" option on the application. This will restore the device to its original configuration, but it will not delete any of your personal data.
Method 3: Using a Recovery Boot menu
1. Insert a paperclip or a needle into the small hole next to the reset button.
2. Press and hold the reset button and the power button together for a few seconds until the device enters a recovery boot menu.
3. Use the Volume buttons to navigate the menu and select "Reset to Factory Settings".
4. Wait for the device to reset and restart.
Note: Before resetting your device to factory settings, make sure you have backed up all of your important data. Resetting your device to factory settings will delete all of your personal data and restore the device to its original configuration, which means that you will lose all of your contacts, settings, files, and any other files that were added to the device.
