How to reset or factory restore Yezz Chico YZ200 device?
The Yezz Chico YZ200 is an android smartphone model that can be reset to its factory settings in case of any technical problems or issues. There are two recommended methods of resetting the device, which are factory data reset and hard reset.
Factory Data Reset:
Factory Data Reset is the recommended method of resetting the device to its factory settings. This method will erase all user data, apps, and settings on the device and restore it to its original state. Here are the steps to perform a factory data reset on Yezz Chico YZ200:
1. Turn off the device.
2. Press and hold the power button and the volume down button together until the bootloader menu appears on the screen.
3. Select "Recovery Mode" using the volume buttons to move the cursor and select the option using the power button.
4. Once the recovery mode menu appears, select "Wipe Data/Factory Reset."
5. Select "Yes - Delete All User Data" to confirm the deletion of all data on the device.
6. Wait for the device to reset to its factory settings.
Note: Performing a factory data reset will erase all data on the device, so make sure to back up important data before proceeding with this method.
Hard Reset:
Hard reset is another method of resetting the device to its factory settings. This method will force the device to shut down and restart, erasing all user data, apps, and settings on the device. Here are the steps to perform a hard reset on Yezz Chico YZ200:
1. Turn off the device.
2. Press and hold the power button until the device shuts down completely.
3. Press and hold the power button and the volume down button together until the bootloader menu appears on the screen.
4. Select "Recovery Mode" using the volume buttons to move the cursor and select the option using the power button.
5. Once the recovery mode menu appears, press and hold the power button and the volume down button together until the parallel bootloader menu appears on the screen.
6. Select "Reboot to Bootloader" and wait for the device to reboot to the bootloader menu.
7. Connect the device to the computer using a USB cable.
8. Open a command prompt on the computer and enter the following command to erase the device's storage:
"fastboot format c:"
9. The device will reset to its factory settings.
Note: Performing a hard reset will erase all data on the device, so make sure to back up important data before proceeding with this method.
In conclusion, both factory data reset and hard reset are effective ways of resetting the Yezz Chico YZ200 device to its factory settings. Choose the method that suits your situation best and proceed with caution.
