How to reset or factory restore Yezz Art 3S device?
Resetting or factory restoring a Yezz Art 3S device is a useful way to erase any unwanted information, settings, apps, and data from the device. This process will bring the device to its original factory settings, and you will need to set it up as a new device again. Please note that this process will erase all information permanently, so make sure to back up any essential data before proceeding. There are several ways to reset or factory restore a Yezz Art 3S device, and the most common and recommended ways are:
1. Using Recovery B Mode:
Step 1: Search for and download the recovery file for Yezz Art 3S from a reliable source.
Step 2: Put the recovery file into the A/B partition of the device.
Step 3: Turn off the device and enter recovery mode.
Step 4: Select the recovery file from the list of options.
Step 5: Once the recovery file is installed, you will be prompted with a warning message. Select "Yes – Delete All User Data" to proceed.
Step 6: Wait for the device to reboot. It may take a few minutes.
2. Using full system swap:
Step 1: Boot the device into recovery mode by pressing and holding the power and volume keys.
Step 2: In the recovery mode, select "Backup Assistance" or the "Internal storage" option, which is usually found under the "Advanced Settings" tab.
Step 3: Select "Clear all user data" or "Clear all Android/Data."
Step 4: Wait for the device to reboot. It may take a few minutes.
3. Using Android Oreo recovery image:
Step 1: Download the recovery image for the Yezz Art 3S device.
Step 2: Connect the device to a computer using a USB cable.
Step 3: Copy the recovery image to the device's A/B partition.
Step 4: Reboot the device into recovery mode.
Step 5: In the recovery mode, select "Install."
Step 6: Select the recovery image file from the list of options.
Step 7: Wait for the device to reboot after installation. It may take a few minutes.
These are the three most common ways to reset or factory restore a Yezz Art 3S device. Remember that this process will erase all information permanently, so make sure to back up any essential data before proceeding. It is also recommended to follow the instructions provided carefully and double-check any information before proceeding.
