The Yezz Andy 4.5M is a mid-range smartphone with a 4.5-inch IPS LCD display, a quad-core processor, 1GB of RAM, 8GB of internal storage, and a 5MP rear camera. It runs on Android 4.4 KitKat and is powered by a 2000mAh battery.
Yezz Andy 4.5M Price
The retail price of a new or used/second hand Yezz Andy 4.5M varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Yezz Andy 4.5M across different regions, markets and countries.
Frequently Asked Questions(FAQs)
What is the battery capacity of Yezz Andy 4.5M?
The Yezz Andy 4.5M has a battery capacity of 2000 mAh
What type of display does the Yezz Andy 4.5M have?
The Yezz Andy 4.5M has an IPS LCD display
What is the processor of the Yezz Andy 4.5M?
The Yezz Andy 4.5M is powered by a Quad-core 1.3 GHz Cortex-A7 processor
How to reset or factory restore Yezz Andy 4.5M device?
There are two main ways to reset or factory restore a Yezz Andy 4.5M device: using the SoftRestore feature provided by the device manufacturer or using the HardReset method, which requires a PC and the appropriate USB cable. SoftRestore Method: 1. Power off the Yezz Andy 4.5M device. 2. Press and hold the Power button, Volume Down button, and Home button simultaneously for 15 seconds. 3. Release the Volume Down button, but continue holding the Power and Home buttons. 4. Wait for the device to enter recovery mode/Bootloader mode. 5. Once you see the "Recovery mode" screen, release the Home button, but keep the Power button pressed. 6. Wait for the device to boot up to the recovery menu. 7. In the recovery menu, select "Factory Reset Data/Wipe Data/Erase All Data" using the Volume keys to navigate and the Power button to select. 8. Wait for the device to complete the factory reset process. 9. Once the device has reset, select "Reboot system" and press the Power button to restart the device. HardReset Method: 1. Power off the Yezz Andy 4.5M device. 2. Connect the device to your computer using a micro-USB cable. 3. Make sure the device is properly detected by your computer and USB debugging is enabled. (You can enable USB debugging by going to Settings > Development > USB debugging.) 4. Download and install the appropriate Yezz Andy 4.5M firmware on your computer from the device manufacturer's website. 5. Use a USB instrument tool like SP FlashTool to flash the firmware onto the device's ROM. 6. Once the firmware has been flashed, disconnect the device from the computer. 7. Power on the device and follow the initial setup process, which may involve restoring your personal data. Note: Using the hard reset method can erase all data on the device, including any important files, contacts, and settings. It is important to back up any important data before attempting a hard reset.
Specifications
Network
| Technology | GSM / HSPA |
|---|---|
| 2G bands | GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 |
| 3G bands | HSDPA 900 / 2100 - SIM 1 or SIM 2 |
| HSDPA 850 / 1900 - SIM 1 or SIM 2 | |
| Speed | HSPA 21.1/5.76 Mbps |
Launch
| Announced | 2014, July. Released 2014, August |
|---|---|
| Status | Discontinued |
Body
| Dimensions | 133.4 x 67.2 x 9.2 mm (5.25 x 2.65 x 0.36 in) |
|---|---|
| Weight | 142 g (5.01 oz) |
| SIM | Dual SIM (Mini-SIM/ Micro-SIM) |
Display
| Type | IPS LCD |
|---|---|
| Size | 4.5 inches, 55.8 cm2 (~62.2% screen-to-body ratio) |
| Resolution | 480 x 854 pixels, 16:9 ratio (~218 ppi density) |
Platform
| OS | Android 4.4.2 (KitKat) |
|---|---|
| Chipset | Mediatek MT6582M (28 nm) |
| CPU | Quad-core 1.3 GHz Cortex-A7 |
| GPU | Mali-400MP2 |
Memory
| Card slot | microSDXC (dedicated slot) |
|---|---|
| Internal | 4GB 1GB RAM |
Main Camera
| Single | 13 MP, AF |
|---|---|
| Features | LED flash |
| Video | 1080p@30fps |
Selfie camera
| Single | 1.3 MP |
|---|---|
| Video |
Sound
| Loudspeaker | Yes |
|---|---|
| 3.5mm jack | Yes |
Comms
| WLAN | Wi-Fi 802.11 a/b/g/n, dual-band, hotspot |
|---|---|
| Bluetooth | 4.0, A2DP |
| Positioning | GPS |
| NFC | No |
| Radio | Stereo FM radio |
| USB | microUSB 2.0 |
Features
| Sensors | Accelerometer, proximity |
|---|
Battery
| Type | Li-Po 1500 mAh, removable |
|---|---|
| Stand-by | Up to 635 h (2G) / Up to 385 h (3G) |
| Talk time | Up to 16 h (2G) / Up to 11 h (3G) |
Misc
| Colors | Black, Blue, Red |
|---|
