XOLO Q900

Home/ XOLO/ Phones/ Q900

Table of Contents

Summary

XOLO Q900 Price

At the time of it's release in 2013, October, the manufacturer's retail price for a new XOLO Q900 was about 120 EUR.

The retail price of a new or used/second hand XOLO Q900 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of XOLO Q900 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the screen size of XOLO Q900?

5 inches

What is the battery capacity of XOLO Q900?

2500 mAh

What is the processor of XOLO Q900?

1.2 GHz Quad Core Processor

How to reset or factory restore XOLO Q900 device?

If you want to reset or factory restore a XOLO Q900 device, there are different ways to do so depending on the situation. Here are the most common and recommended methods: Method 1: Soft Reset A soft reset will reboot your device and clear out any temporary glitches or issues. Here's how to perform a soft reset on XOLO Q900: 1. Press and hold the Power button for 10 seconds or until the device shuts down. 2. Wait for a few seconds and then press and hold the Volume Up button along with the Power button. 3. Release both buttons after 30 seconds. 4. Wait for the device to restart. Method 2: Factory Data Reset A factory data reset will erase all data and settings from your device and restore it to its default settings. This should only be done if you have lost all hope of recovering your data and want to start fresh with a new device. Here's how to perform a factory data reset on XOLO Q900: 1. Go to Settings > Backup & Reset > Factory Data Reset. 2. Tap on Reset phone to start the process. 3. Confirm that you want to erase all user data by tapping on Erase All User Data. 4. Wait for the device to complete the reset process. Method 3: Bootloader Bootloader allows you to perform a full system restore to a specific image file. This can be useful if you have a specific image file that you want to restore your device to. Here's how to bootloader on XOLO Q900: 1. Connect your device to a computer using a USB cable. 2. Go to the XOLO Q900 bootloader page and download the appropriate image file for your device. 3. Boot your device into bootloader mode by pressing and holding the Power button until it boots into the bootloader menu. 4. Connect your device to your computer and follow the instructions to flash the image file to your device. These are the most common and recommended ways to reset or factory restore a XOLO Q900 device. Before proceeding with any of these methods, make sure that you have a backup of any important data, as these methods will erase all data from your device.