XOLO Q800 X-Edition

Home/ XOLO/ Phones/ Q800 X-Edition

Table of Contents

Summary

XOLO Q800 X-Edition Price

At the time of it's release in 2013, February, the manufacturer's retail price for a new XOLO Q800 X-Edition was about 100 EUR.

The retail price of a new or used/second hand XOLO Q800 X-Edition varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of XOLO Q800 X-Edition across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of XOLO Q800 X-Edition?

The XOLO Q800 X-Edition has a 2000 mAh battery capacity.

What is the processor of XOLO Q800 X-Edition?

The XOLO Q800 X-Edition is powered by a 1.2GHz quad-core MediaTek MT6589 processor.

What is the display size of XOLO Q800 X-Edition?

The XOLO Q800 X-Edition has a 4.5-inch qHD IPS display.

How to reset or factory restore XOLO Q800 X-Edition device?

If you are facing any software glitches or want to reset your device back to its original state, then resetting your XOLO Q800 X-Edition device is a good option. Here are the most common and recommended ways to reset or factory restore a XOLO Q800 X-Edition device: Method 1: Soft reset Soft reset is the simplest way to reset your device. It involves rebooting the device and then entering the bootloader mode. Follow these steps to perform a soft reset: 1. Turn off your device. 2. Press and hold the power button for around 15 seconds. 3. Release the power button. 4. Press and hold the volume up button and the power button for around 10 seconds. 5. Your device should be in bootloader mode now. 6. In bootloader mode, select "Recovery" and press "OK". 7. Your device will boot into recovery mode. 8. In recovery mode, select "Wipe data/factory reset" and press "OK". 9. Confirm the wipe by selecting "Yes - delete all user data". 10. Your device will begin to reset. Method 2: Hard reset A hard reset is a more drastic method of resetting your device. It involves restoring your device to its original state by using a stock ROM or firmware. It should be done only as a last resort if you are unable to solve the issue with a soft reset. To perform a hard reset, you will need the following: 1. A PC or laptop. 2. Internet connection. 3. The stock ROM or firmware of your device. 4. USB cable. 5. Batteries and external chargers. Here are the steps to perform a hard reset: 1. Go to the official XOLO website (xolo.com) and download the stock ROM or firmware for your device. 2. Connect your device to your PC or laptop using a USB cable. 3. Enable "USB debugging" on your device by going to "Settings" > "Developer options" > "USB debugging". 4. Install the USB debugging USB drivers on your PC or laptop. 5. Open a command prompt on your PC or laptop and navigate to the folder where the stock ROM or firmware is located. 6. Type the following command and press "Enter": flashing bootloader