XOLO Q700s

Home/ XOLO/ Phones/ Q700s

Table of Contents

Summary

XOLO Q700s Price

At the time of it's release in 2014, January, the manufacturer's retail price for a new XOLO Q700s was about 120 EUR.

The retail price of a new or used/second hand XOLO Q700s varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of XOLO Q700s across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of XOLO Q700s?

The XOLO Q700s has a 2000 mAh battery capacity.

What is the processor of XOLO Q700s?

The XOLO Q700s is powered by a 1.3GHz quad-core MediaTek MT6582 processor.

How to reset or factory restore XOLO Q700s device?

XOLO Q700s is an Android smartphone that runs on the KitKat operating system. If you want to reset or factory restore your device, here are the most common and recommended ways to do so: 1. Boot into recovery mode: To reset or factory reset your XOLO Q700s device, you need to boot into recovery mode first. To do this, turn off your device and press and hold the power and volume up buttons together until the recovery mode menu appears. 2. Factory data reset: Once you are in recovery mode, select the "Factory data reset" option from the menu. A warning message will appear asking you to confirm the action. Once you confirm, the device will erase all data and settings, returning it to its factory state. This process may take several minutes, and your device will restart once it’s done. 3. Reset through settings: You can also reset your device by going into the settings menu. Scroll down and select "Backup & Reset." Under the "Reset phone to factory settings" option, select "Yes -- Erase all my data." A warning message will appear asking you to confirm the action. Once you confirm, the device will start to erase all data and settings, and once it’s done, it will restart. 4. Reset through ADB: If you have a computer with the Android Debug Bridge software installed, you can use it to reset your device. First, connect your device to your computer using a USB cable. Open a command prompt with the "adb push" and "adb reboot recovery" commands, and then use the "adb shell wipe data/factory reset" command to erase all data and settings on your device. It’s important to note that resetting a device will erase all data, so make sure to back up any important files or information before proceeding. Also, make sure to follow the factory reset instructions carefully, as there is a risk of damaging the device if the process is not done correctly.