XOLO Q2000

Home/ XOLO/ Phones/ Q2000

Table of Contents

Summary

XOLO Q2000 Price

At the time of it's release in 2013, November, the manufacturer's retail price for a new XOLO Q2000 was about 160 EUR.

The retail price of a new or used/second hand XOLO Q2000 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of XOLO Q2000 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of XOLO Q2000?

The XOLO Q2000 has a 3000 mAh battery capacity.

What is the processor of XOLO Q2000?

The XOLO Q2000 is powered by a 1.2GHz quad-core MediaTek MT6589 processor.

What is the display size of XOLO Q2000?

The XOLO Q2000 has a 5.5-inch HD IPS display.

How to reset or factory restore XOLO Q2000 device?

To reset or factory restore XOLO Q2000 device, you can choose from the following methods: Method 1: Using Software Recovery 1. After switching off the XOLO Q2000 device, press and hold the Volume Up and Power buttons simultaneously until the XOLO logo appears on the screen. 2. Release the buttons and press Volume Down button, and then press and hold the Power button until you see "Reboot system / Factory reset" on the screen. 3. Release both buttons and select "Factory data reset / erase the user data / Full data erase" option using Volume keys, and then press Power button to select the option. 4. When prompted, select "Yes, delete all user data on the device" and then wait for the erasure process to complete. Method 2: Using Hardware Keys 1. Turn off the XOLO Q2000 device. 2. Press and hold the Volume Up and Home buttons simultaneously until the XOLO logo appears on the screen. 3. Release the Volume Up button, and then press and hold the Power button and Home button simultaneously. 4. Release both the buttons, and then select "Wipe data/factory reset". 5. Select "Yes -- Erase all user data" and wait for the process to complete. Method 3: Using USB Debugging 1. Connect the XOLO Q2000 device to your computer via USB cable. 2. Make sure USB debugging is enabled in the developer options of the device. 3. Open a command prompt on your computer and navigate to the directory where the XOLO USB driver is installed. 4. Type "adb devices" command to confirm that ADB is detecting the XOLO device. 5. Type "adb reboot recovery" command to reboot the device in recovery mode. 6. Select "Wipe data/factory reset" and select "Yes -- Erase all user data". 7. Wait for the erasure process to complete. Note: Before performing any of these methods, make sure to back up your important data as these methods will erase all data on the device. It is also recommended to have a good battery charge before starting the process.