Xiaomi Watch S1

Home/ Xiaomi/ Phones/ Watch S1

Table of Contents

Summary

Xiaomi Watch S1 Price

At the time of it's release in 2021, December 31, the manufacturer's retail price for a new Xiaomi Watch S1 was about 270 EUR.

The retail price of a new or used/second hand Xiaomi Watch S1 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Xiaomi Watch S1 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Xiaomi Watch S1 device?

If you want to reset or factory restore a Xiaomi Watch S1, there are several methods you can follow. Here are the most common and recommended ways to do it: Method 1: Using the Xiaomi Watch app You can reset your Xiaomi Watch S1 using the Xiaomi Watch app on your phone. Here are the steps to do it: 1. Connect your Xiaomi Watch S1 to your phone using the charging cable. 2. Open the Xiaomi Watch app on your phone. 3. Tap on the "Settings" icon in the bottom-left corner of the app. 4. Tap on "System". 5. Scroll down and tap on "Reset all data". 6. Confirm the action by tapping on "Reset all data". 7. Wait for the watch to reset and set up as new. Method 2: Using the Battery Mode Reset Another way to reset your Xiaomi Watch S1 is to put it in battery mode and wait for it to drain. Here are the steps to do it: 1. Make sure your Xiaomi Watch S1 has no charge left. 2. Press and hold the power button on the watch for 10 seconds. 3. Release the power button and wait for the watch to power off completely. 4. Wait for the watch to charge back up completely. 5. Turn on your phone and connect to the Xiaomi Watch app. 6. Access the "Settings" menu and select "System". 7. Select "Reset all data" and confirm the action. 8. Wait for the watch to reset and set up as new. Method 3: Using DFU Mode DFU (Download Firmware) mode is another way to reset your Xiaomi Watch S1 to factory settings. Here are the steps to do it: 1. Connect your Xiaomi Watch S1 to your computer using the charging cable. 2. Open a command prompt on your computer. 3. Run the following command to check the serial number of your Xiaomi Watch S1: fastboot devices 4. Identify the serial number of your watch and use it to find the firmware file for your watch model. You can find the firmware file on the Xiaomi website. 5. Run the following command to enter DFU mode on your Xiaomi Watch S1: fastboot flash dfu 6. Wait for your Xiaomi Watch S1 to enter DFU mode. 7. Run the following command to check if your Xiaomi Watch S1 is in DFU mode: fastboot flashing list 8. Run the following command to reset your Xiaomi Watch S1 to factory settings: fastboot reset 9. Wait for your Xiaomi Watch S1 to reset and set up as new. It's important to note that using this method may result in data loss on your Xiaomi Watch S1. Use it with caution.

What is the battery capacity of the Xiaomi Watch S1?

The Xiaomi Watch S1 has a 420mAh battery capacity.

What is the display size of the Xiaomi Watch S1?

The Xiaomi Watch S1 has a 1.78-inch display size.

What is the processor of the Xiaomi Watch S1?

The Xiaomi Watch S1 is powered by a Qualcomm Snapdragon Wear 2500 processor.

Specifications

Network

Technology: No cellular connectivity
2G bands: N/A
3G bands: N/A
4G bands: N/A
Speed: No
GPRS: No
EDGE: No

Launch

Announced: 2021, December 28
Status: Available. Released 2021, December 31

Body

Dimensions: 46.5 x 46.5 x 11 mm (1.83 x 1.83 x 0.43 in)
Weight: 53 g (1.87 oz)
Build: Sapphire crystal front, stainless steel frame, plastic back
SIM: No
: Waterproof (5ATM)

Display

Type: AMOLED
Size: 1.43 inches
Resolution: 466 x 466 pixels (~326 ppi density)

Platform

OS: Proprietary OS

Memory

Card slot: No
Internal: Unspecified storage

Camera

: No

Sound

Loudspeaker: Yes
3.5mm jack: No

Comms

WLAN: Wi-Fi 802.11 b/g/n
Bluetooth: 5.2, A2DP, LE
Positioning: GPS (L1+L5), GLONASS, GALILEO, BDS, QZSS
NFC: Yes
Radio: No
USB: No