Name: Xiaomi Redmi Note 6 Pro
Brand: Xiaomi
Price: 200 EUR

Question 1

How to reset or factory restore Xiaomi Redmi Note 6 Pro device?

Accepted Answer

A Xiaomi Redmi Note 6 Pro device can be reset to its initial settings through a "factory reset" or "master reset" process. This will erase all user data, apps, and settings on the device, and restore it to its factory state. The process of a factory restore can be accessed through the device's settings, recovery mode, or through a custom recovery. It is important to note that a factory reset should only be performed if all other methods to recover deleted or lost data have been exhausted, as it will permanently delete all user data. It is recommended to back up all important data before performing a factory reset. Here are the most common and recommended ways to reset or factory restore a Xiaomi Redmi Note 6 Pro device:

1. Using the recovery mode:
- Turn off your Redmi Note 6 Pro and press and hold the "Volume-up" button along with the "Power" button until the device enters the recovery mode screen.
- On the recovery mode screen, select "Wipe data/factory reset" using the volume buttons to navigate and the power button to select.
- Confirm "Yes - Erase User Data" and wait for a few minutes for the device to reset to factory settings.
- Once the reset is complete, select "Reboot system" and wait for the device to turn back on. The device will now be reset back to its factory settings.

2. Using a custom recovery:
- Download and install a custom recovery such as TWRP on your Redmi Note 6 Pro device.
- Backup all important data before proceeding to the recovery.
- In TWRP, select "Wipe" and then "Write tables" to ensure that all data is cleared.
- In TWRP, select "Wipe" and then "Data/factory reset" to erase all user data.
- Confirm the wipe and wait for the device to reset to factory settings.
- Once the reset is complete, reboot the device and go into TWRP to install ROM.
- Transfer data to the device again and enjoy the device as usual.

3. Using a PC:
- Connect your Redmi Note 6 Pro device to your PC using a USB cable.
- Enable "USB debugging" on your device by going to Settings > Developer options > USB debugging.
- Open a command prompt on your computer, navigate to the folder where the ROM image is saved, and type the command: "fastboot flash recovery twrp-image.img" (replace "t wp-image.img" with the actual name of the recovery image file).
- Check if the recovery has been successfully flashed onto the device by connecting to the Wi-Fi network on your computer and disconnecting the device from the Wi-Fi network.
- Once you are able to connect to the Wi-Fi network again, you will see that the device is with a new ROM installed. Go to the new ROM menu, and select "Wipe" and "Wipe data/factory reset".
- Confirm the wipe and wait for the device to reset to factory settings.
- Once the reset is complete, reboot the device and enjoy the device as usual.

It is important to note that the above methods are just the recommended and suggested ways to reset or factory restore a Xiaomi Redmi Note 6 Pro device, and you may encounter different scenarios in each of the above methods. It is recommended to read the instructions carefully before attempting to reset your device, as the process of resetting to factory settings is permanent and may cause data loss.

Question 2

What is the battery capacity of the Xiaomi Redmi Note 6 Pro?

Accepted Answer

The Xiaomi Redmi Note 6 Pro has a 4000 mAh battery.

Question 3

What type of display does the Xiaomi Redmi Note 6 Pro have?

Accepted Answer

The Xiaomi Redmi Note 6 Pro has a 6.26-inch IPS LCD display.

Question 4

What is the processor of the Xiaomi Redmi Note 6 Pro?

Accepted Answer

The Xiaomi Redmi Note 6 Pro is powered by a Qualcomm Snapdragon 636 processor.

Technology	GSM / HSPA / LTE
2G bands	GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands	HSDPA 850 / 900 / 1700(AWS) / 1900 / 2100
4G bands	1, 3, 4, 5, 7, 8, 20, 38, 40
1, 2, 3, 4, 5, 7, 8, 28, 38, 40
Speed	HSPA, LTE-A

Announced	2018, September
Status	Available. Released 2018, October

Dimensions	157.9 x 76.4 x 8.3 mm (6.22 x 3.01 x 0.33 in)
Weight	182 g (6.42 oz)
Build	Glass front (Gorilla Glass), aluminum back, plastic frame
SIM	Hybrid Dual SIM (Nano-SIM, dual stand-by)

Type	IPS LCD
Size	6.26 inches, 97.8 cm2 (~81.1% screen-to-body ratio)
Resolution	1080 x 2280 pixels, 19:9 ratio (~403 ppi density)
Protection	Corning Gorilla Glass (unspecified version)

OS	Android 8.1 (Oreo), planned upgrade to Android 10, MIUI 12
Chipset	Qualcomm SDM636 Snapdragon 636 (14 nm)
CPU	Octa-core (4x1.8 GHz Kryo 260 Gold & 4x1.6 GHz Kryo 260 Silver)
GPU	Adreno 509

Xiaomi Redmi Note 6 Pro