How to reset or factory restore Xiaomi Redmi K30 5G device?
There are a few different ways to reset or factory restore a Xiaomi Redmi K30 5G device:
1. Using the built-in reset feature in the Redmi K30 5G's settings menu:
To reset your Redmi K30 5G to its factory settings using the built-in reset feature, follow these steps:
a. Go to the "Settings" menu on your Redmi K30 5G.
b. Scroll down to the "About phone" section.
c. Tap on "Build number" several times until the "You are now a developer!" message appears.
d. Tap on "System" in the "Settings" menu.
e. Tap on "Advanced" in the "System" menu.
f. Tap on "Reset options" in the "Advanced" menu.
g. Tap on "Reset all user data/factory data reset" in the "Reset options" menu.
h. Follow the on-screen instructions to confirm that you want to reset your device to its factory settings.
2. Using a computer and Redmi K30 5G's USB port:
To reset your Redmi K30 5G to its factory settings using a computer and its USB port, you will need to have the Redmi K30 5G's USB cable, a computer with the Xiaomi Mi Flash tool or Xiaomi Mi PC client installed, and a USB flash drive with a recovery ROM (ROM stands for Read-Only Memory and it is a factory image that will erase all user data and settings on the device) on it.
a. Connect the Redmi K30 5G to the computer using the USB cable.
b. Enable USB debugging on the Redmi K30 5G by going to "Settings" > "About phone" > "Build number" > "You are now a developer!" > "Developer options" > "USB debugging".
c. Run the Xiaomi Mi Flash tool or Xiaomi Mi PC client on the computer.
d. Select "Recovery ROM" from the drop-down menu and choose the recovery ROM that you downloaded from the Xiaomi website to your computer.
e. Select "Recovery" as the protocol and "Fastboot" as the authentication method.
f. Click on "Flash" in the Xiaomi Mi Flash tool or Xiaomi Mi PC client.
g. Wait for the device to reset to its factory settings.
5. Using a computer and a recovery ROM you can download from Xiaomi's website:
To reset your Redmi K30 5G to its factory settings using a computer and a recovery ROM that you download from Xiaomi's website, you will need to have the Redmi K30 5G's USB cable, Xiaomi Mi USB Debugger, a computer, a USB flash drive with the recovery ROM on it, and good knowledge of recovery methods.
a. Connect the Redmi K30 5G to the computer using the USB cable.
b. Enable USB debugging on your Redmi K30 5G by going to "Settings" > "About phone" > "Build number" > "You are now a developer!" > "Developer options" > "USB debugging".
c. Connect the USB debugger to the computer and select "USB Debugger" in the "Developer Options" menu on your device.
d. Open a terminal window on the computer and enter the command "adb devices" to make sure that ADB (Android Debug Bridge) is detecting your device.
e. Download the recovery ROM from Xiaomi's website to your computer.
f. Use the ADB command "adb push recovery.img /dev/sdcard/" to push the recovery ROM to the device's internal storage.
g. Reboot your Redmi K30 5G into recovery mode by pressing and holding the "Volume Up" and "Power" buttons at the same time until the device enters recovery mode.
h. While the device is in recovery mode, select "Install ZIP from SD card" and
