How to reset or factory restore Xiaomi Mi Pad 4 device?
If you are experiencing problems with your Xiaomi Mi Pad 4 device and need to reset or factory restore it, there are a few common and recommended methods you can try:
Method 1: Recovery Mode
1. Turn off your Xiaomi Mi Pad 4 device.
2. Press and hold the Volume Down and Power buttons at the same time until you see the recovery menu.
3. Select "Factory Data Reset" from the menu and wait for the process to complete.
4. Once the device is reset, select "Reboot system now" from the menu and wait for the device to start up again.
Method 2: Fastboot commands
1. Connect your Xiaomi Mi Pad 4 device to your computer using a USB cable.
2. Open a command prompt on your computer and navigate to the directory where the Mi Pad 4 fastboot files are stored.
3. Type "fastboot reboot recovery" and press Enter.
4. Your Xiaomi Mi Pad 4 device will reboot into the recovery menu.
5. Select "Factory Data Reset" from the menu and wait for the process to complete.
6. Once the device is reset, select "Reboot system now" from the menu and wait for the device to start up again.
Method 3: Recovery Mode from Bootloader
1. Turn off your Xiaomi Mi Pad 4 device.
2. Press and hold the Volume Up and Power buttons at the same time until you see the bootloader menu.
3. Select "Recovery mode" from the menu and wait for the device to reboot into recovery mode.
4. Once in recovery mode, select "Factory Data Reset" from the menu and wait for the process to complete.
5. Once the device is reset, select "Reboot system now" from the menu and wait for the device to start up again.
Method 4: Mi PC Suite
1. Connect your Xiaomi Mi Pad 4 device to your computer using a USB cable.
2. Open the Mi PC Suite software on your computer.
3. Select your device from the list of connected devices.
4. Click on the "Maintenance" tab and select "Factory data reset".
5. Wait for the process to complete.
6. Once the device is reset, select "Reboot system now" from the menu and wait for the device to start up again.
It's important to note that using the fastboot commands method requires your device to have the USB debugging option enabled in its settings, and you may need to grant ADB entries to the computer that you are using to perform the reset. Additionally, it's recommended to back up any important data before performing a factory reset, as it will erase all data on the device.
