How to reset or factory restore Wiko Y52 device?
The Wiko Y52 is a smartphone that can be reset or factory restored to its original state if it is facing any software issues or is not functioning as expected. There are two ways to reset or factory restore a Wiko Y52 device: through the settings menu and using a computer. We will go through both methods in detail.
Method 1: Resetting or Factory Restoring through the Setting Menu
1. Turn off the Wiko Y52 device by pressing and holding the power button until the phone completely shuts down.
2. Turn on the device by pressing the power button until the Wiko logo appears on the screen.
3. Press and hold the volume up button and the power button simultaneously until the Wiko recovery menu appears on the screen.
4. Select "Wipe data/factory data" using the volume keys and press the power button to confirm the selection.
5. A confirmation message will appear on the screen. Select "Yes - delete all user data" using the volume keys and press the power button to confirm the selection.
6. The device will now begin to erase all user data and reset to its original state. This process may take several minutes.
7. Once the process is complete, the device will reboot, and you will be prompted to set up the device as a new one.
Method 2: Resetting or Factory Restoring using a Computer
1. Download and install the latest version of the Wiko USB driver on your computer from the official Wiko website: [www.wikiotech.com/support/downloads/](http://www.wikiotech.com/support/downloads/)
2. Connect the Wiko Y52 device to your computer using a USB cable.
3. Launch the Wiko PC Suite application on your computer and connect your device to it.
4. Click on the "Recovery" tab and select "Flash ROM" from the dropdown menu.
5. Select the latest ROM file for your device from the available options and click on "Flash ROM" to start the flashing process.
6. The device will reboot and enter recovery mode. Once you are in recovery mode, you can select "Wipe data/factory data" from the menu and follow the same steps as in Method 1 to reset the device.
7. After the device has been reset, it will reboot and prompt you to set up the device as a new one.
Note: Resetting or factory restoring a device should be done only when necessary, as it will erase all user data and restore the device to its original state. Make sure to back up any important data before resetting or factory restoring your Wiko Y52 device.
